INFO: Trad Archery for Bowhunters



Author Topic: Pearson Spoiler Info???  (Read 623 times)

Online Rick Wiltshire

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 715
Pearson Spoiler Info???
« on: July 17, 2008, 07:40:00 PM »
I just picked up a Pearson Spoiler 7152. It has black glass and a black wood sandwiched between brown in the riser.  

Does anyone have any info on the bow???

Thanks,

Rick

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Pearson Spoiler Info???
« Reply #1 on: July 18, 2008, 06:13:00 AM »
Made 1973 thru 1977. The handle is Marblewood, the brace height is 7 to 8 1/2 and the glass was called black Pearsonite.

Offline trapperDave

  • Trad Bowhunter
  • **
  • Posts: 1484
Re: Pearson Spoiler Info???
« Reply #2 on: July 18, 2008, 09:30:00 AM »
and there you have....the rest of the story  :D

Online Rick Wiltshire

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 715
Re: Pearson Spoiler Info???
« Reply #3 on: July 18, 2008, 10:13:00 AM »
Thanks guys I appreciate the info.

I see that the bow was only produced for 5 years.  Were there some issues with the bow for its short run or was it just not a good seller?

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Pearson Spoiler Info???
« Reply #4 on: July 18, 2008, 08:38:00 PM »
The Pearson catalogs kind of petered out after 1977. The bow may have been made for a couple years after 1977 but just was not in the catalogs. The catalogs did not have much in them after 1977. I believe it is a 73-77 and they were good short hunting bows and nice lookers as well. The Rogue was another model that falls into the same time frame. You have a good bow and it should be a good shooting treestand bow for you. Not one to take to the range and shoot 50 targets with unless of course you are more macho than most. Anyhow a good little bow that packs a nice little punch as well.

Online Rick Wiltshire

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 715
Re: Pearson Spoiler Info???
« Reply #5 on: July 19, 2008, 11:17:00 PM »
Thanks guys I appreciate the help.

Rick

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©