INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: WANTED: HOYT TORQUE STABALIZERS  (Read 1436 times)

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
WANTED: HOYT TORQUE STABALIZERS
« on: August 06, 2008, 05:44:00 PM »
I need to find a set of torque stabalizers for the Hoyt Pro Medalist.

While I would like to get my hands on a nice shiney set with perfect chrome, I am open to anything available.  The newer looking the better.

If anyone has a set that they would be willing to let go, I would appreciate it.  THese are getting hard to find unless you buy a beat up Pro Medalist and they happen to still have the Torque bars.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #1 on: August 06, 2008, 06:07:00 PM »
Jack ..I have a set of the Hoyt torque flight compensators in the orng. box. I sent you a email about your 64 kodiak....Mike
Logged
TGMM Family Of The Bow

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #2 on: August 06, 2008, 07:39:00 PM »
Mike

I have to check the bow for condition.  I think it is about an 8 but I want to check first.

How much you want for the stabelizers.  OK

The bow is clean with a new light grey rug and a white calf hair side plate. The side plate is hard and dried out a bit, curling on the edges.  It should probably be changed.  You can get '64 replicas pretty cheap. I got it from Bowdoc a few years back.

It does have two stress lnes on the upper belly and several short ones on the upper back.  All are before the fadeout in the riser section.

Other than that I can't find any bumps, bruises, scratches, dings, etc... anywhere.  The bow is clean, except for the stress lines.

Now the killer.  It is not 42#.  I was mistaken,  It is a 40#.  I know you want one heavier than that.

Depending on how you feel about the stree lines, I would call it a 9.

So what do you want for the stabalizers.  I need them for the 5PM I just got off e8ay.  The description said it comes with a stabelizer, but that comes out to me an iorn hunting stabalizer like you see on cheap wheelie bows.  I told him not to send it.  Got three of those.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #3 on: August 06, 2008, 08:31:00 PM »
Jack.. Sorry I must pass on the bow 40# is a bit too light. I don't have the stabilzers, what I have is the compensators. They went between the bow and the stabilizer and where made by Hoyt.
   Thanks Mike
Logged
TGMM Family Of The Bow

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #4 on: August 06, 2008, 08:43:00 PM »
Logged
TGMM Family Of The Bow

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #5 on: August 06, 2008, 08:52:00 PM »
Well, do you want to let those go, or do you have a need for them.

I have a set of stabelizers for mu PM.  Now these are the older ones that went with the original Pro Medalist.  

I also have a really clean 5PM but no stabelizers for it.  That s why I am looking for a set.  I woulove to get the set of compendstors to go withe either the stabelizers I have or the additional set if I can find them.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #6 on: August 06, 2008, 09:11:00 PM »
Jack....sent you a PM.
Logged
TGMM Family Of The Bow

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #7 on: August 07, 2008, 08:14:00 AM »
MIKE

I want them.  I can pay through PqyPal or send a check.  Let me know what shipping is.  I have no problem with adding 3% for PayPal.

Sent you a PM back.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #8 on: August 07, 2008, 08:59:00 AM »
Jack...Pm sent....Thanks Mike
Logged
TGMM Family Of The Bow

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #9 on: August 07, 2008, 09:27:00 AM »
Mike

PM sent - Payment sent through Paypal
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #10 on: August 07, 2008, 09:39:00 AM »
OK

Mike Shaw has provided me witht he compensators pictured above.  ThanX Mike

Now I am still on a quest to find a pair of the stabelizers themselves.  Like those pictured here:  

230277900163 .

This bow has the stabelizers and compenssators.  All I need now are the pair of  stabalizers, although I would consider the stabelizers w/ compensators if anyone has them.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Mike Shaw

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 519
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #11 on: August 07, 2008, 10:21:00 AM »
Your welcme Jack..Glad to help
Logged
TGMM Family Of The Bow

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #12 on: August 07, 2008, 12:58:00 PM »
ROCKED MY WORLD

GLAD TO GET THEM
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #13 on: August 08, 2008, 03:11:00 PM »
C'MON

Somebody has a pair of stabalizers hanging around gathering dust.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #14 on: August 11, 2008, 08:26:00 AM »
No Hoyt stabalizers?

I guess I'll have to pin all my hopes on e8ay.

I hate to have to buy another Hoyt PM just to get the stabalizers.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: WANTED: HOYT TORQUE STABALIZERS
« Reply #15 on: August 11, 2008, 05:10:00 PM »
Mike

I got the compensators in...ThanX

Now I still need the rods.
Logged
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©