INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Filling screw holes  (Read 413 times)

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Filling screw holes
« on: April 01, 2009, 12:44:00 AM »
Have 2 holes with inserts on the side of my Red Wing Hunter. Also have two in front for the Wing Quiver which I will use. Should I fill the holes on the side and if yes, what should I fill them with?
Thanks
sam
Logged

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Filling screw holes
« Reply #1 on: April 01, 2009, 08:53:00 AM »
Sam on a nice bow like a Red Wing Hunter if it were me.I would go to harbor freight and buy a set of plug cutters for around 10 bucks.Then drill the holes in the RWH as clean and smooth edged as you can.Once the hole are straight and clean.Cut two plugs from some type matching wood.Tap the plugs into the wood(not to hard or they may split the riser) and add one drop of super glue around the edges of the plug after its tapped into the hole.Those will look way better then any wood fillers or puddy.bowdoc
Logged

Offline Ssamac

  • Trad Bowhunter
  • **
  • Posts: 971
Re: Filling screw holes
« Reply #2 on: April 02, 2009, 02:03:00 AM »
Thanks bowdoc. that does sound good. How do I get the brass inserts out?   :confused:    :confused:
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©