3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: CX Heritage 90  (Read 287 times)

Offline flinthead

  • Trad Bowhunter
  • **
  • Posts: 295
CX Heritage 90
« on: December 07, 2007, 05:01:00 PM »
After waiting since ATAR for the Heritage 90's to come out , called to order them and found out the total length of shafts are 29 inches . That leaves me and a lot of others with too short of an arrow . With a 28 in. draw the arrow needs to be at least 291/2 to 30 in. long to shoot . Glad Sipsey told me before they were shipped . Will have to go back with a heavy point and full length Heritage 150's. Just a note to let others know before they ordered .
Maybe it is time to shoot what I have on the rack

Offline Jason Kendall

  • Trad Bowhunter
  • **
  • Posts: 1210
Re: CX Heritage 90
« Reply #1 on: December 07, 2007, 07:21:00 PM »
BUMMER!!!!!! I was really looking forward to trying them. Thanks for the info.

Offline Cherokee Scout

  • Trad Bowhunter
  • **
  • Posts: 1849
Re: CX Heritage 90
« Reply #2 on: December 07, 2007, 07:42:00 PM »
I shot some today, really nice shafts, but length will not let some shooters use them. I plan to discuss with CX people to see if they can make them longer.
John

Offline Longbowwally

  • Trad Bowhunter
  • **
  • Posts: 750
Re: CX Heritage 90
« Reply #3 on: December 07, 2007, 08:16:00 PM »
I have a 28" draw and cut my arrows to 29" with no problems....

What is the deflection on the 90's?

thanks
LONG LIVE THE LONGBOW!

Wally Holmes

Offline Jason Kendall

  • Trad Bowhunter
  • **
  • Posts: 1210
Re: CX Heritage 90
« Reply #4 on: December 07, 2007, 09:08:00 PM »
.530 I think I read somwhere.

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: CX Heritage 90
« Reply #5 on: December 07, 2007, 09:28:00 PM »
I have to agree, that if your draw is a true 28"s a 29" arrow should be fine, unless ya got hugh fingers. Shawn
Shawn

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Re: CX Heritage 90
« Reply #6 on: December 08, 2007, 06:54:00 AM »
I'm shooting my 150s at 31" with 250 total up front.  I don't think I can use the 29" 90s unless I use about the same point weight.  I was hoping to drop some weight.  What do you think Shawn?
I didn't claw my way to the top of the food chain to eat vegetables!

Offline bayoulongbowman

  • Trad Bowhunter
  • **
  • Posts: 3765
Re: CX Heritage 90
« Reply #7 on: December 08, 2007, 10:59:00 AM »
WOW...I just ordered 12 Dz. for my store just to see if archers like em ...Hope so  :)
"If you're living your life as if there is no GOD, you had  better be right!"

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: CX Heritage 90
« Reply #8 on: December 08, 2007, 06:29:00 PM »
The dflection is not all that different than the 150s as I recall, but could be wrong the 150 are .487 or around that. Yeah ya may be ok with same point weight but I am not sure. Shawn
Shawn

Offline Cherokee Scout

  • Trad Bowhunter
  • **
  • Posts: 1849
Re: CX Heritage 90
« Reply #9 on: December 08, 2007, 08:22:00 PM »
The 90s are .530 spine.
John

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: CX Heritage 90
« Reply #10 on: December 08, 2007, 08:25:00 PM »
The Carbon Express Heritage 90's are also a slightly smaller diameter,the nocks and inserts are smaller the the 150's.So the standard 50 and 100 gr. inserts will not work in them,a 9/32 point fits perfect.They are the same diameter as their Thunderstorm and Junior line.I tried too see if the GT add on weights will fit inside the shaft and they will not fit inside.They should work good on lighter weight bows.

Offline cajunbowhntr

  • Trad Bowhunter
  • **
  • Posts: 154
Re: CX Heritage 90
« Reply #11 on: December 09, 2007, 10:40:00 AM »
Mark,where is your store???


CB
"Forget your lust for the rich mans gold all that you need is in your soul...Find a woman and you'll find love and don't forget son,there is someone up above...Ronnie Van Zant "simple man"

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©