INFO: Trad Archery for Bowhunters



Author Topic: Removing Paint From An Old Recurve  (Read 523 times)

Offline GrayRhino

  • Trad Bowhunter
  • **
  • Posts: 836
Removing Paint From An Old Recurve
« on: October 27, 2009, 10:49:00 PM »
What is the best way to get camo paint off an old bow?  I have a few that I've acquired and would like to see how they look under all the paint.  

Maybe there is already a thread on this, but I searched and did not find one.  

Thanks.
God  now commandeth all men everywhere to repent.  Acts 17:30

"All bowhunting trips are good,  some are just real good!"  Bill Baker

"We're all trophy hunters...until something else comes along."  Glenn St. Charles

Offline 4runr

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6799
Re: Removing Paint From An Old Recurve
« Reply #1 on: October 27, 2009, 11:37:00 PM »
I used paper towels "DAMPENED" with acetone on a '61 Grizzly.

Don't get the papertowel too wet. You don't want to let the acetone penetrate into the glue. Worked fast to remove most of it, then I sanded the rest off.
Kenny

Christ died to save me, this I read
and in my heart I find a need
of Him to be my Savior
          By Aaron Shuste

TGMM Family of the Bow

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Removing Paint From An Old Recurve
« Reply #2 on: October 28, 2009, 05:57:00 AM »
best way to remove removable camo is with covergirl 100% acetone finger nail polish remover and one of those green scotch-brite pads...bd

Offline GrayRhino

  • Trad Bowhunter
  • **
  • Posts: 836
Re: Removing Paint From An Old Recurve
« Reply #3 on: October 28, 2009, 12:14:00 PM »
Thanks for the info.  

Bowdoc, scrubbing with the scotch-brite pad won't hurt the finish underneath the camo paint?
God  now commandeth all men everywhere to repent.  Acts 17:30

"All bowhunting trips are good,  some are just real good!"  Bill Baker

"We're all trophy hunters...until something else comes along."  Glenn St. Charles

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Removing Paint From An Old Recurve
« Reply #4 on: October 28, 2009, 10:04:00 PM »
Take some comet and mix with water. Scrub the bow with a damp cloth dipped in the comet. If you are lucky some paints will come right off. If not you are in to the accetone. This will harm the varnish finish the comet will not. It is worth a try before you go to the accetone.

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Removing Paint From An Old Recurve
« Reply #5 on: October 29, 2009, 05:23:00 AM »
Covergirl Acetone finger nail polish remover will not hurt the original finish unless you do a lot of scrubbing because the actual original finish was a 3 part finish mixed with a hardner and tempeture controled cure time(real hard finish originaly).99% of camo paints come from those rattling type bomb cans and dry rather softish and will scrub off the bow rather quickly.Where as the original finish you will be scubbbbbbbbbing to remove that stuff.bd

Offline PAPALAPIN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2642
Re: Removing Paint From An Old Recurve
« Reply #6 on: October 29, 2009, 12:38:00 PM »
I've used regular bulk acetone and never had a problem with the original finish.

I guess Bowdoc uses Cover Girl  because that's what he has around the house to remove his fingernail polish.    :banghead:      :banghead:
JACK MILLET-TBG,TGMM Family of the Bow


"Don't worry about tomorrow.  If the sun doesn't come up in the morning, we will play in the dark" - ME

The most important part of your hunting setup is the broadhead.  The rest is just the delivery system.

Offline Snakeeater

  • Trad Bowhunter
  • **
  • Posts: 583
Re: Removing Paint From An Old Recurve
« Reply #7 on: October 29, 2009, 03:53:00 PM »
How else do you think he gets those red limb tips to look so BEAUTIFUL.
  :goldtooth:
Larry Schwartz, Annapolis, Maryland

Do yourself a favor and join your state bowhunting organization!

Professional Bowhunters Society
Traditional Bowhunters of Maryland
Maryland Bowhunters Society
National Rifle Association

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Removing Paint From An Old Recurve
« Reply #8 on: October 29, 2009, 04:40:00 PM »
OK Jack you let the cat out of the bag and now everyone will think I'am just another cheap easy covergirl date.With that said I would like to mention I am easy but not cheap.
I know this sounds crazy however finger nail polish remover is filterd in the manufacturing process a bit better then over the counter acetone.Not sure why may so it don't eat the ends of your fingers off.bd

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©