3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Delta 3D Deer questions  (Read 607 times)

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Delta 3D Deer questions
« on: December 10, 2007, 02:37:00 PM »
I've been looking for a decent 3D target for the back-yard range. I've found a UK supplier for the Delta 'Backyard' buck & 'Riverbottom' buck targets, along with the regular 3Ds.

1. What's the difference between the two?

2. What's the difference between these cheaper versions & the regular Deltas?

3. What's your opinions/experiences been like with either of the above?

4. How do they hold up to broadheads?

Thanks in advance for the help!     :D
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Tom Leemans

  • Trad Bowhunter
  • **
  • Posts: 2339
Re: Delta 3D Deer questions
« Reply #1 on: December 10, 2007, 03:51:00 PM »
Both of those are average 3D targets IMO. O.K. for field tips, but I'd try to find one with a layered vital section for broadheads. (Like the GlenDel buck)  cabelas
Got wood? - Tom

Offline PastorSteveHill

  • Trad Bowhunter
  • **
  • Posts: 731
Re: Delta 3D Deer questions
« Reply #2 on: December 10, 2007, 04:06:00 PM »
AMEN to that! Preach on Tom...
Blessings,
Steve

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Delta 3D Deer questions
« Reply #3 on: December 10, 2007, 04:07:00 PM »
hey brother ask  big ronhuntalot he had heaps of 3d targets at his house when i went there.  :thumbsup:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline BobW

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 2318
Re: Delta 3D Deer questions
« Reply #4 on: December 10, 2007, 04:18:00 PM »
no good for broadheads.....
"A sagittis hungarorum libera nos Domine"
>>---TGMM-Family-of-the-Bow--->
Member: Double-T Archery Club, Amherst, NY
St. Judes - $100k for 2010 - WE DID IT!!!!

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Delta 3D Deer questions
« Reply #5 on: December 10, 2007, 04:24:00 PM »
Ah, right-oh.

Unfortunately we don't have aything much better over here (no real need for them) & the cost of importing things like the GlenDel & the Delta Broadhead buck is ridiculous.

Looks like I'll have to stick to practicing with field points. At least I'll have something anatomical to work with!  :D
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline gilf

  • Trad Bowhunter
  • **
  • Posts: 113
Re: Delta 3D Deer questions
« Reply #6 on: December 11, 2007, 11:15:00 AM »
Rob care to share the info on where you might be getting one from?

They did have them in Decathlon for a while but they don't seem to do them any more. I know Quicks had a supply of them for a while also but they are now out of stock.

They are just so terribly expensive in the UK.

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Delta 3D Deer questions
« Reply #7 on: December 11, 2007, 11:18:00 AM »
Quicks have got them back in, according to the site. Both the Backyard buck & the Riverbottom.
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline BobCo 1965

  • Trad Bowhunter
  • **
  • Posts: 1364
Re: Delta 3D Deer questions
« Reply #8 on: December 11, 2007, 11:22:00 AM »
As others have said, they do not hold up all that well to broadheads. However, I still use them as I can usually get about three or four of them to one of the better targets. If you happen to shoot two bladed head, they will hold up longer though. I also like them because they are on the small side. I'd rather practice on a smaller target. I don't bother getting the replacement vitals though. Mainly because the target is pretty much toast by the time it needs replacing and the replacement will not fit very tight.

Offline joe c.

  • Trad Bowhunter
  • **
  • Posts: 74
Re: Delta 3D Deer questions
« Reply #9 on: December 11, 2007, 02:15:00 PM »
For the price their not bad you get what you pay for. My biggest problem with them was the plastic that connected the legs to the body.
when shooting from an eleveted stand the arrows tend to get caught in that plastic and this tears up the target,and can be a pain if shooting broadheads,trying to get them out.
Ive since switched to the glendel and really like their full rut buck.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©