Low Cost Wood Shafts?

[geno]

I think alot of dealers get there poc from rose city anyway..

[Shawn Leonard]

Do ya have a flecther and and feathers and nocks and a taper tool(pencil sharpener type works well)? If ya do not want toinvest in a lot PM me your addy. I will send ya some LW feathers and some nocks as well some 125 grain glue on points. If I were you I would go to Lowes or Home Depot and get some dowels ramin, oak whatever they have, get the stiffest 5/16ths they got and cut them to 28"s and go from there, ya can use 3/8ths, but ya have to find the weakest ones of those. Shawn

[Deadbolt]

WOW thanks for all the replies ya'll!!!  I am going to make a list of all these placs and start making some phone calls!!!

[**DONOTDELETE**]

Tom, email me if you need help making them up...

[flat-lander]

www.hildebrandarrowshafts.com
Great arrow shafts!

[LBR]

For POC shafts, I recommend Raven Archery.  If you need the number, let me know.  Tom turns his own, and his are among the best I've seen--his "selects" are better than most "premiums" I've seen.  All hand spined and weighed.

Chad

[Deadbolt]

Originally posted by LBR:
For POC shafts, I recommend Raven Archery.  If you need the number, let me know.  Tom turns his own, and his are among the best I've seen--his "selects" are better than most "premiums" I've seen.  All hand spined and weighed.

Chad

if you cojuld get ahold of his number that would be awsome chad!

Also what spine ya'll think I should go with?  Looking for a FOC shaft with the 160g snuffers if I could.  Was thinking the 50-55 cut to like 28-29 should do it out of this bow.  45@28 drawing a hair over 27.

[Scotch]

Have you looked at badgerarrow.com?  Bare shafts or complete arrows and they have a spine chart you can use as a guide.