INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Glue Question, Repair Job  (Read 475 times)

Offline sloaf

  • Trad Bowhunter
  • **
  • Posts: 95
Glue Question, Repair Job
« on: April 05, 2011, 08:03:00 PM »
I picked up a magnesium minuteman the other day and the overlays on the back are starting to separate.  For some reason the overlays were not finished and have started to come loose and warp slightly.  Any recommendations for a glue I can wick down into the cracks and clamp to repair are appreciated.  Also wondering where I can find a grip for it too?  Its a sweet bow I really like.
Logged
If your shooting stinks, work with a Form master.  It'll bring back your A game.

Offline OldSkoolArcher

  • Trad Bowhunter
  • **
  • Posts: 791
Re: Glue Question, Repair Job
« Reply #1 on: April 05, 2011, 08:16:00 PM »
What exactly do you mean by overlays? Tip Overlays? If so, I have never seen minuteman limbs with tip overlays.

Keep you eyes peeled 1R, 2R and 3R Plastic or Rubber Grips will all fit your riser.
Logged

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Glue Question, Repair Job
« Reply #2 on: April 05, 2011, 09:49:00 PM »
Loctite 420 is a good glue to use.
Logged

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Glue Question, Repair Job
« Reply #3 on: April 05, 2011, 10:10:00 PM »
yes LT 420 is the
super glue of super glues.Any pics maybe I was trying to think of what the overlays on a MM looked like ??? bd
Logged

Offline sloaf

  • Trad Bowhunter
  • **
  • Posts: 95
Re: Glue Question, Repair Job
« Reply #4 on: April 06, 2011, 01:42:00 PM »
The overlays are built up the backs of the limbs in the limb pockets.  They basically are there to provide the indent for the springs to latch into in the slip joint design.  I'll give loctite a try.
Logged
If your shooting stinks, work with a Form master.  It'll bring back your A game.

Offline sloaf

  • Trad Bowhunter
  • **
  • Posts: 95
Re: Glue Question, Repair Job
« Reply #5 on: April 07, 2011, 12:57:00 PM »
Got the glue job completed. Here are some pictures.
 
Logged
If your shooting stinks, work with a Form master.  It'll bring back your A game.

Offline d. ward

  • Trad Bowhunter
  • **
  • Posts: 5791
Re: Glue Question, Repair Job
« Reply #6 on: April 07, 2011, 01:31:00 PM »
oh yeah loctite 420 will wick right into the gap.Then use about 2-4 pounds of presure from 2 C clamps let the 420 dry over night and you should be good to go bd
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©