INFO: Trad Archery for Bowhunters



Author Topic: Clicking noise on Bear limb  (Read 625 times)

Offline trapper

  • Trad Bowhunter
  • **
  • Posts: 56
Clicking noise on Bear limb
« on: January 13, 2013, 05:56:00 PM »
Anyone know how to stop a clicking noise coming from the latch area on the top limb of my Bear takedown?
Will McQueen

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8261
  • Contributing Member
Re: Clicking noise on Bear limb
« Reply #1 on: January 14, 2013, 08:28:00 PM »
Limb is probably just a tad lose in the pocket. Two tiny felt pads about the diameter of a pencil eraser on each side of the top or bottom of the limb near the butt. Small rubber pads would also work. Or you might find some nylon drawer stop pads and cut them down to size.  You'll only need a sixteenth of an inch or so, maybe less.  For that matter, a couple thicknesses of duct tape might do it.  Good luck.

Oops.  Didn't see the other thread on this topic.

Offline ahandle70

  • Trad Bowhunter
  • **
  • Posts: 67
Re: Clicking noise on Bear limb
« Reply #2 on: January 14, 2013, 10:32:00 PM »
Try a little bit of string wax on it.  I had a newer Gainesville B riser that did the same thing and the wax solved it.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©