INFO: Trad Archery for Bowhunters



Author Topic: Vintage Ben Pearson Age Question  (Read 815 times)

Offline RustyJames

  • Trad Bowhunter
  • **
  • Posts: 14
Vintage Ben Pearson Age Question
« on: March 15, 2013, 08:39:00 AM »
Hello All,

A friend of mine dug this out of his attic. I believe its been in his family since he was a kid. Anyone have any idea of the age of this bow, or any other information of interest I can pass along? Also, what is the wisdom (or lack thereof) in stringing it up and shooting it? Any tips/warnings?

 

 

 

 

 
Morrison ILF, W&W Recurve Limbs
'98 Damon Howatt Hunter, 40#,
'72 Bear Kodiak, 45#
Damon Howatt Coronado, 45#, 58"
Howatt "Super Diablo" (compound), 50#

Offline wadde

  • Trad Bowhunter
  • **
  • Posts: 930
Re: Vintage Ben Pearson Age Question
« Reply #1 on: March 15, 2013, 08:43:00 AM »
It is probably late 50's early 60's. If you string it, do so gently, flexing the limbs a little at a time and listen for creaking noises. Alot of these are prone to break if suddenly strung after years in the attic.

Offline RustyJames

  • Trad Bowhunter
  • **
  • Posts: 14
Re: Vintage Ben Pearson Age Question
« Reply #2 on: March 15, 2013, 11:01:00 AM »
Yes, I suspect it might be better kept as decorative. Pretty little bow, and a piece of history......

Thanks for the info.
Morrison ILF, W&W Recurve Limbs
'98 Damon Howatt Hunter, 40#,
'72 Bear Kodiak, 45#
Damon Howatt Coronado, 45#, 58"
Howatt "Super Diablo" (compound), 50#

Offline TheUnatural

  • Trad Bowhunter
  • **
  • Posts: 25
Re: Vintage Ben Pearson Age Question
« Reply #3 on: March 15, 2013, 10:03:00 PM »
Yeah, if you look under the wrap, you'll see that these bows are usually two joined pieces of wood (the limbs). If you want to get it shooting, you'll probably want to delaminate these pieces (including the tips), clean them up with sandpaper, and re-glue them. It's what I did for my Hickory Bow. Also, I would suggest sanding the entire bow down and adding a sealant, as hickory tends to get sluggish when it gets moist. And you should only use Dacron B-50 for the string, as it tends to be a bit easier on these older bows. Finish it all up with a strong (and safe) new handle wrapping.
Something I Learned Making Bows: You never know how many small cuts and scrapes you have on your hands UNTIL you wipe something down with acetone.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©