Author Topic: Can someone help me with the Damon Howatt? (Read 766 times)

frassettor · « **on:** December 09, 2013, 06:51:00 PM »

http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=1;t=134007

reddogge · « **Reply #1 on:** December 09, 2013, 08:35:00 PM »

I just measured my 62" Monterey which is the same bow but fancier and it took a 56 1/2-57" string to give an 8" brace height. Seems not right but that's what I got.

I'd use 60-65# spine for 29" arrows with 125 gr points.

Phil Magistro · « **Reply #2 on:** December 09, 2013, 10:41:00 PM »

I have a 1968 Hunter that is marked 62" but takes a 56.5" string. The 62" was before AMO. Using correct measurements the bow is 61" AMO.

reddogge · « **Reply #3 on:** December 09, 2013, 10:54:00 PM »

Thanks Phil, I thought I was loosing my mind.

frassettor · « **Reply #4 on:** December 10, 2013, 04:52:00 AM »

Thanks guys, I'm assuming a Dacron string?

Phil Magistro · « **Reply #5 on:** December 10, 2013, 07:17:00 AM »

Some folks will tell you to only use dacron but I use fastflight with padded loops on all my vintage bows that have a tip overlay. I have a 1962 Hunter that did not have tip overlays so I put them on.

News:

Author Topic: Can someone help me with the Damon Howatt? (Read 766 times)

frassettor

Can someone help me with the Damon Howatt?

reddogge

Re: Can someone help me with the Damon Howatt?

Phil Magistro

Re: Can someone help me with the Damon Howatt?

reddogge

Re: Can someone help me with the Damon Howatt?

frassettor

Re: Can someone help me with the Damon Howatt?

Phil Magistro

Re: Can someone help me with the Damon Howatt?

Users currently browsing this topic: