3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: tuning woodies  (Read 402 times)

Offline sbschindler

  • Trad Bowhunter
  • **
  • Posts: 432
tuning woodies
« on: December 25, 2007, 02:20:00 AM »
I've been shooting carbon out of my longbows (pronghorn) for the past few years, I decided to shoot wood again, don't know why just got the feeling.  I got  2 doz new wood arrows for christmas, they are 55-60 lb spine and my bow is 50Lb at 29, I shot a few bare shafts and they went ever which way some were nock high and straight in, some were just nock left.  So shot a few fletched arrows and they fly great cut to 30 inches, shot a few with 145 grain tips and a few with 160 grain tips, couldn't really tell any difference, so I think I'll just shoot them as is and not worry about it, So what do ya think ????

Offline NorthShoreLB

  • Trad Bowhunter
  • **
  • Posts: 634
Re: tuning woodies
« Reply #1 on: December 25, 2007, 03:28:00 AM »
Yes
"Almost none knows the keen sense of satisfaction which comes from taking game with their own homemade weapons"

-JAY MASSEY-

Offline Larry247

  • Trad Bowhunter
  • **
  • Posts: 518
Re: tuning woodies
« Reply #2 on: December 25, 2007, 03:55:00 AM »
Yeah, i'd shootem...
A trophy is in the eye of the beholder.

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: tuning woodies
« Reply #3 on: December 25, 2007, 12:03:00 PM »
I say leave them fletched, or you can do half and leave half bareshaft and tune per O.L. Adcock....

Offline stump man

  • Trad Bowhunter
  • **
  • Posts: 77
Re: tuning woodies
« Reply #4 on: December 25, 2007, 12:07:00 PM »
My motto.. If it ain't broke, don't fix it.
stump

Offline Dirty Bill

  • Trad Bowhunter
  • **
  • Posts: 621
Re: tuning woodies
« Reply #5 on: December 25, 2007, 12:54:00 PM »
Tune with fletching on. It ain't rocket science. ..or is it?    :campfire:

Offline 30coupe

  • Trad Bowhunter
  • **
  • Posts: 3114
Re: tuning woodies
« Reply #6 on: December 25, 2007, 02:47:00 PM »
I've had much better luck tuning woodies with the fletching on. Your combination sounds about right to me. If they hit where you are looking and fly good, they are tuned. Wood is much more forgiving than carbon anyway. Fletch 'em and fling 'em!
Kanati 58" 44# @ 28" Green glass on a green riser
Bear Kodiak Magnum 52" 45# @ 28"
Bodnik Slick Stick longbow 58" 40# @ 28"
Bodnik Kiowa 52" 45# @ 28"
Kanati 58" 46# @ 28" R.I.P (2007-2015)
Self-made Silk backed Hickory Board bow 67" 49# @ 28"
Bear Black Bear 60" 45# @28"
NRA Life Member

Online The Whittler

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2866
Re: tuning woodies
« Reply #7 on: December 25, 2007, 07:27:00 PM »
Try a broad head with the feathered woody. If they fly good then your all set.

Alan

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: tuning woodies
« Reply #8 on: December 25, 2007, 08:28:00 PM »
woods good. well any arrow that flys good off my bows are good arrows be they wood alum or carbon. just shoot em and if they hit the spot there good to go.  :archer:
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: tuning woodies
« Reply #9 on: December 25, 2007, 10:18:00 PM »
I agree, if they shoot with feathers on them, just do it.  55-60# is close to being on the weak side for your draw length and bow weight, but if they work, go with it.  

One thing to keep in mind, you don't always get what you think you do when you buy arrows.  I've seen arrows range by more than 20# in sets that are supposed to be grouped within 5#.  Also, some builders don't pay attention to the orientation of the spine when they install the nocks.  On cedars, a shaft nocked perpendicular to the grain, which is the correct way, will exhibit about 3# or more spine than the same shaft nocked parallel to the grain.  

When arrows are spined, they should be spined perpendicular to the grain as well.  With electronic spining, that doesn't always happen, and even when spined by hand, builders don't always take the time to do it right.  But wood is very forgiving.  As long as they're overspined, most wood arrows will shoot quite well out of most bows.  But not if they're underspined, unless we're talking selfbows with no or very small sight windows.  Good luck.  Have fun.

Offline Steve P

  • Trad Bowhunter
  • **
  • Posts: 159
Re: tuning woodies
« Reply #10 on: December 25, 2007, 10:41:00 PM »
I'm thinking along the same lines as The Whittler. Give them a try with your broadheads.


Steve

Offline Wudstix

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6299
  • Wood arrows & D/R Longbows Rule!!!
Re: tuning woodies
« Reply #11 on: December 25, 2007, 11:03:00 PM »
I've found that about 10# spine about bow weight is just about right.  This is for tapered arrows.
"If you're not living on the edge, you're taking up too much space!!!" - Me

Psalms 121: 1-3 - King David

60" Big River 67#@28"              
60" MOAB D/R LB 62#@27"
60" Big River D/R LB 65#@27"
62" Kota Badlands LB 72#@28"
62" Howatt TD 62#@28
58” Bear Grizzly 70#@28”
62" Big River D/R LB 60#@30"
66" Moosejaw Razorback LB 60#@28"

"Memento Mori"
PBS - Associate Member
Retired DoD Civ 1985-2019

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©