elk hunting

[elkkrazy8]

Hello,
     I jjust made the switch 3or4 weeks ago.I go to Colo.elk hunting,and was wondering what setup would be the best. I should be getting my new bob lee recurve very shortly(I HOPE). It is 55#@28". Was wondering if 550 or 600 grain arrow would be enough. Thanks
                   Bill

[Barney]

I'd say yep.  

[T. Downing]

I usually stay far away from these type of posts because there are so many bowhunters who love lightweight arrow/broadhead setups for hunting elk.BowHunting elk with a 55lb bow requires a broadhead/arrow combination that has a total weight of 650 grains. Now I know there are those bowhunters out there, including myself, that have killed elk with lighter arrow setups. Good for them. However, in true hunting conditions, elk deserve a heavy penetrating arrow, its that simple. Bill, I hope you research Tradgang archives and look at all of the experienced bowhunters out there and see what they recommend you ought to be taking elk with. T.

[Mike Bolin]

ttt

[J-dog]

I hunt Whitetail w/650 grain arrows 55# tip recurve, overkill?? not when bones are a threat.  my thought would be to go heavier at least cross that 650 mark.

550 or 600 will definately do it, no doubt, but-more the merrier (to an extent). Course no experience w/elk so take it for what it is worth.

J

[Howard S.]

Bill,

I agree with T. Downing.  I shot my 1st elk this year with pulling 53# on my longbow.  I shot a 660gr. arrow.  I got lucky and missed bone going and coming and got a complete pass through.  Read the Dr. Ashby penetration study thread or the great article in the current TBM they will provide a great deal of information on what arrow characteristics contribute most to penetration.  I also used O.L. Adcocks tuning process to get my arrows flying the best I could.  

Howard

[overbo]

560gr arrow w/ a 2 bld head.30 yrd shot went thru the shoulder blade and centered the rib under the blade and buried under the skin on the opposite side   http://i80.photobucket.com/albums/j172/overbo/035.jpg[/IMG]]

[T-Bone]

55#bow,easton 2018 arrow,5grain/in weight tubes,and a 125 grain magnus stinger=660 grains.
Good setup for elk

[T-Bone]

550 would cerainly work, but 600-700 grains will easily penetrate ribs for sure from that bow.  From that bow I would expect you will get around a 160 fps with 650, which would work great like T. Downing recommends.

[Viking69]

Awesome Bull CONGRATULATIONS!!!!!!!

[**DONOTDELETE**]

question, that weight is from a 28"drawn bow arrows around 29"BOP. I have a shrew 54" 52#@26" 650grn arrows the bow shoots about 160fps. That should work too right? I know it's more impotent to have a very sharp BH and hit the right spot.

[Dirty Bill]

I think 650 grains with a well tuned arrow would be about perfect for elk,moose or bear.A razor sharp 2 blade like the eclipse,and a well placed shot should make for a short trail.

Good luck. By the way,the same setup can be used for deer or anything else.  

[Dirty Bill]

Originally posted by overbo:
560gr arrow w/ a 2 bld head.30 yrd shot went thru the shoulder blade and centered the rib under the blade and buried under the skin on the opposite side   http://i80.photobucket.com/albums/j172/overbo/035.jpg[/IMG]]    [/b]

Congradulations. What poundage bow were you shooting?

[elkkrazy8]

Thanks for all the info,There are alot of very knowledgable guys on here willing to help others,thats great. Nice bull overbo.Im leaning toward 650 and a 2 blade head.
                 Thanks
                    Bill

[SteveB]

This year: 53# @28 - 435gr gt 5575 - Silver Flame 2 blade.
Cow elk - clipped both scapulas and broke near ribs - broadhead buried just under off side skin.
80 to 100 yds and down. Don't know how she deserved anything heavier - got it done with a combo 200gr under the "required" wght. And will use similar again.

Steve