INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: power hammer  (Read 939 times)

Offline Shaun

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3619
power hammer
« on: October 16, 2008, 10:10:00 PM »
saw this item on Craigs List in IL and though of all you metal workers... not sure about moderator view of this type of listing, but its not the unmentionable auction site.

 http://iowacity.craigslist.org/tls/873239255.html
Logged

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: power hammer
« Reply #1 on: October 17, 2008, 07:59:00 AM »
Shaun, Being that this is a very sought after item for many here, I would think this post is fine.  Additionally if you want to pick it up and come to bear camp next year, I'd be happy to drive the rest of the way once you drop it off  :bigsmyl:  tippit
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: power hammer
« Reply #2 on: October 17, 2008, 05:31:00 PM »
wish I had 3200 bucks....but then again, I found a place that offers plans for a press you can build for 100 dollars, and using Harbor Freight equipment and steel from around the junkyard..and a 200 dollar air compressor will operate it.

I think I am going that route for now.
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline TxMoon

  • Trad Bowhunter
  • **
  • Posts: 142
Re: power hammer
« Reply #3 on: October 17, 2008, 05:39:00 PM »
Ray please let me know of this place! I am looking for power hammer  or a hydraulic press but dont really know witch one would be better for blade work? can you or anyone explain to me the pros and cons of either of them? please
Logged
Technique and Knowledge is the largest factor in being able to build a good knife. Lin Rhea

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: power hammer
« Reply #4 on: October 17, 2008, 05:42:00 PM »
A power hammer is just that....it strikes blows. In my opinion only, that would be the way to go if you can do it....me-I'm going cheap the first time and building the hydraulic press..It takes longer to do the work with the press...but the initial investment is considerably less.
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: power hammer
« Reply #5 on: October 17, 2008, 08:37:00 PM »
you can do a search on YouTube for hydraulic press and it will come up...guy named TToler did it.

I'll find the plans location and post that later.
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline TxMoon

  • Trad Bowhunter
  • **
  • Posts: 142
Re: power hammer
« Reply #6 on: October 18, 2008, 07:31:00 PM »
Thanks Ray look forward to the plans
Logged
Technique and Knowledge is the largest factor in being able to build a good knife. Lin Rhea
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©