Short kit buildalong

[bjansen]

Here is a short buildalong on my first knife. I obtained the blade from Woodcraft.


step 1: glue up the scales (Devcon 5 min) epoxy.  I used hickory, yellowheart then cocobolo

 

[bjansen]

trace scales


 

[bjansen]

Cut the scales on the bandsaw.  I use a clamp to maintain a safe distance from the blade:

 

[bjansen]

Start to shape the handle after dry assembly

 

[bjansen]

Glue the handle on the tang, (devcon 5 min epoxy again)

 

[bjansen]

Starting on the sheath.  7-8 oz. leather with 1-2 oz suede on the inside:

 

 

[bjansen]

Sew it up and cut it to final shape

 

[bjansen]

Meanwhile, start coating the handle with finish....I used Cambells Magnalac, 2 coats, sand coat, sand, coat sand, wax, polish

 

[bjansen]

I am out of snaps...so I imprised a antler button and elastic cord to hold it in...the sheath probably hold it tight enough by itsself

 

[bjansen]

Stain and finish the leather

 

[bjansen]

Finished knife

 

 

 

[theunluckyhunter]

good job. and great looking knife!

[d. ward]

Wow that was great..Thanks for the post.bd

[skullworks]

Great job!

[prarieboy]

Lookin Good ! I really like your handle scales.
 C-Ya Bob