INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: An itch I had to scratch......  (Read 930 times)

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
An itch I had to scratch......
« on: December 30, 2008, 12:30:00 PM »
I'll call it the "Hatch-ling" because it's not really quite a full grown-up Hatchet - yet.
I had been wanting to make a few hatchets for some time.
As well, I had been wanting to fulfill some Sterling Silver wire inlay as well, so this gave me the perfect canvas for both!
I left the head, which I forged out of my 1 inch square 5160, slightly unfinished by leaving some of the heat treating scale and scratches.
The haft is curyl maple - of course.
This head was fully hardened for use as a pounding instrument as well. The high temp back-draw should leave it just right.
I think it's perfect for a "pelvis popper" or a rib splitter if working on a large deer or maybe an Elk? A Moose?
My hat is off to those who make these frequently.
It challenged me from the get-go and offered me quite a mental exercise!
 

 
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline prarieboy

  • Trad Bowhunter
  • **
  • Posts: 719
Re: An itch I had to scratch......
« Reply #1 on: December 30, 2008, 12:59:00 PM »
Karl everything that I have seen on this site made by you is great!   :thumbsup:   C-Ya Bob
Logged
Look up!It's ALL above us.

Offline drewsbow

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 5902
Re: An itch I had to scratch......
« Reply #2 on: December 30, 2008, 03:45:00 PM »
very nice work  :thumbsup:    :notworthy:    :clapper:    :clapper:
Logged
Try to be the person your dog thinks you are :0)
TGMM Family of the Bow
N.Y. Bowhunters member
BigJim 3 pc buffalo 48@28
BigJim thunderchild 55@31
BigJim thunderchild 55@32 Jim's bow

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: An itch I had to scratch......
« Reply #3 on: December 30, 2008, 07:19:00 PM »
As I said on one of your last posts."Challenges are Great"thats what makes all of us better craftsmen.
Great work!!!   :thumbsup:
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: An itch I had to scratch......
« Reply #4 on: December 30, 2008, 07:31:00 PM »
You're reaching out there Karl. That's a very good lookin hatchet. Do you mind telling us how you drifted the eye? Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: An itch I had to scratch......
« Reply #5 on: December 30, 2008, 08:01:00 PM »
Lin, I drilled two 1/2" holes about 1/4" apart. Filed out the web.
Then, heated the blade and drifted the opening even using a hawk drift. I drifted the top opening slightly larger than the bottom, so that when the haft was wedged, it could not go back down the hole!
Sitting next to you last year in Atlanta is what inspired me to do the inlay.
Thanks, Lin.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: An itch I had to scratch......
« Reply #6 on: December 30, 2008, 08:11:00 PM »
OH BABY!  That is too cool!  I love everything about that!
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: An itch I had to scratch......
« Reply #7 on: December 31, 2008, 06:48:00 PM »
Thanks for that explanation. I like everything about this hatchet. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline vermonster13

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 14572
Re: An itch I had to scratch......
« Reply #8 on: December 31, 2008, 07:22:00 PM »
Very sweet
Logged
TGMM Family of the Bow
For hunting to have a future, we must invest ourselves in future hunters.

Offline imskippy

  • Trad Bowhunter
  • **
  • Posts: 805
Re: An itch I had to scratch......
« Reply #9 on: December 31, 2008, 11:27:00 PM »
It's awesome. I love everything about it aswell. Seams I need to get me a forge huh?  SKippy
Logged
Zona Custom T/D #1
Zona Custom R/D L/B #1

Offline chiger

  • Trad Bowhunter
  • **
  • Posts: 100
Re: An itch I had to scratch......
« Reply #10 on: January 01, 2009, 01:12:00 AM »
You Da Man Karl.  

How many years you been kickin' around that ideal?  ;~)

Hawk looks great.  The front on and top view really shows what a master of steel you are.

And the wire looks great too!

Beautiful work!
Logged
chiger,

I generally eat whatever I can get catched up!

Offline Chris Surtees

  • Trad Bowhunter
  • **
  • Posts: 5697
Re: An itch I had to scratch......
« Reply #11 on: January 01, 2009, 06:17:00 AM »
:thumbsup:    :thumbsup:    :thumbsup:
Logged

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: An itch I had to scratch......
« Reply #12 on: January 02, 2009, 09:03:00 PM »
Karl, that thing needs some pine sap on it.  Send it my way and I'll make sure it is "christened"!
Seriously, nice hawk.  
Dan
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©