INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: How to Polished antler Knobs  (Read 666 times)

Offline Jesse

  • Trad Bowhunter
  • **
  • Posts: 17
How to Polished antler Knobs
« on: February 08, 2009, 01:10:00 PM »
Just got some antler limb bolts for my widow from sticshooter, beautiful by the way Frank thanks.
But I have some projects i want to try and was wondering how do you polish the roughness out of the crowns and make them so smooth?
I know it is probably simple but inquiring minds want to know.
thanks
Logged
"Empowering the Believer thru God's Word"

Offline crumrw

  • Trad Bowhunter
  • **
  • Posts: 60
Re: How to Polished antler Knobs
« Reply #1 on: February 08, 2009, 04:43:00 PM »
The way I do it is with sand paper.  I start with 120 grit and work my way to 600 grit wet.  That will usually do the trick.  The I put a little jewelers rouge on a leather strop and go to town till it is almost mirror shine.  Hope that helps
Logged

Offline knives

  • Trad Bowhunter
  • **
  • Posts: 7
Re: How to Polished antler Knobs
« Reply #2 on: February 09, 2009, 08:51:00 AM »
Try using a sanding drum on a dremel then the polishing wheels with a green or white compound.
Logged

Offline theunluckyhunter

  • Trad Bowhunter
  • **
  • Posts: 365
Re: How to Polished antler Knobs
« Reply #3 on: February 09, 2009, 08:54:00 AM »
dremel to get it smooth, then sandpaper on the heel of your hand. then finish it out with rgk's super glue finish, be shinin like a diamond in a goat's butt
Logged
anything can happen on a texas friday night, if you dont mind your manners you dont mind a fight
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©