INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: soon to start first try at wire inlay  (Read 1050 times)

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
soon to start first try at wire inlay
« on: June 16, 2009, 08:48:00 PM »
i am fixing to try the wire inlay for the first time.  does yall have any suggestions or tips that will help put me on the right path? thanks alot
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: soon to start first try at wire inlay
« Reply #1 on: June 16, 2009, 09:14:00 PM »
Yep.
 http://www.blademag.com/article/silverwireinlaypartone/

 http://www.knifeworld.com/handles-guards.html

These will save you time and aggravation like you won't believe!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: soon to start first try at wire inlay
« Reply #2 on: June 16, 2009, 09:57:00 PM »
Have you handle shape very close to finished befor you start.  Mine were just slabs when I did then I shaped the wood and removed alot of the wire and had to redo it!

inlay is alot of fun!

Steve
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: soon to start first try at wire inlay
« Reply #3 on: June 17, 2009, 08:21:00 AM »
Do lots of reading and attend hammer ins and classes, if possible. Go for it. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: soon to start first try at wire inlay
« Reply #4 on: June 17, 2009, 06:19:00 PM »
thanks yall
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: soon to start first try at wire inlay
« Reply #5 on: June 17, 2009, 06:46:00 PM »
Dustin,

   That book, "Handles and Guards", that Karl mentioned, is just great. Money well spent. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: soon to start first try at wire inlay
« Reply #6 on: June 17, 2009, 11:08:00 PM »
i was wanting to use copper wire but i am having trouble finding copper bezel wire.  any suggestions?
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: soon to start first try at wire inlay
« Reply #7 on: June 18, 2009, 07:26:00 AM »
If you want to use copper you'll have to cut your own wire.  I bought a sheet of copper the same thickness as my silver.

I started out learning with brass and nickel silver, then switched to silver.  Using the cheaper materials encourages you to practice a lot.  You'll end up with tool handles and random pieces covered in vines and swirls.  I'm pretty sure I wouldn't have done any of that if I started with silver.
Logged
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: soon to start first try at wire inlay
« Reply #8 on: June 18, 2009, 08:01:00 AM »
Good advice Jeremy. If and when you do decide to buy any fine silver, I would get the ribbon shaped wire ( I guess thats what you call bezel ), and get full soft. They have full hard, medium soft, and full soft. It will be so much easier and smoother to make the bends and curves.
  I bought a set of mini pliers from Craftsman that are pretty good for the bending and cutting. I dont cut anything but the silver with the cutters. In new condition, they clip the silver off smooth, with no sided to side breaking. I let my wife use another set and she cut some stainless wire for her jewelry and now they dont cut smooth. So I bought me another set and she got the others. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©