INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Removing oil from a sharpening stone?  (Read 763 times)

Offline Oliverstacy

  • Trad Bowhunter
  • **
  • Posts: 1915
Removing oil from a sharpening stone?
« on: August 11, 2009, 04:38:00 PM »
Just wondering what would be the best way of getting oil out of a sharpening stone. I have found a better oil to use and want to get the existing oil out of them.  Thought about using gun scrubber but didn’t know if that would hurt them.

Thanks,

Josh
Logged
Custom Flemish Strings by Oliverstacy!  
Kanati 60" 57@29"
AP Cumberland 66" 58@29"
WhisperStik KajikaStik 56" Recurve with Canebrakes...57@28"
WhisperStik KajikaStik aka "Wormy" RC & LB,both 55@29"
Martin Savannah 50@28"
Kota Kill-um 55@28"

Offline KHALVERSON

  • Trad Bowhunter
  • **
  • Posts: 846
Re: Removing oil from a sharpening stone?
« Reply #1 on: August 11, 2009, 04:54:00 PM »
josh
i have used mineral spirits with good success
 
kevin
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Removing oil from a sharpening stone?
« Reply #2 on: August 11, 2009, 04:55:00 PM »
I would use Dawn dishwashing liquid in warm water.

That said, I dont use the oil except to float filings away. I oil the stone and wipe it off, then sharpen the knife. If the stone loads up, I oil it and wipe it again. Sometimes I wash away the filings with WD-40 and wipe off and go again. Lin
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline fatman

  • Trad Bowhunter
  • **
  • Posts: 1312
Re: Removing oil from a sharpening stone?
« Reply #3 on: August 11, 2009, 05:28:00 PM »
Gun scrubber will do it...I've also used carb cleaner....
Logged
"Better to have that thing and not need it, than to need it and not have it"
Woodrow F. Call

Commitment is like bacon & eggs; the chicken is involved, but the pig is committed....

Offline Oliverstacy

  • Trad Bowhunter
  • **
  • Posts: 1915
Re: Removing oil from a sharpening stone?
« Reply #4 on: August 11, 2009, 05:46:00 PM »
Quote
Originally posted by fatman:
Gun scrubber will do it...I've also used carb cleaner....
I was thinking carb cleaner also but didn't want to totally old school on them!

Josh
Logged
Custom Flemish Strings by Oliverstacy!  
Kanati 60" 57@29"
AP Cumberland 66" 58@29"
WhisperStik KajikaStik 56" Recurve with Canebrakes...57@28"
WhisperStik KajikaStik aka "Wormy" RC & LB,both 55@29"
Martin Savannah 50@28"
Kota Kill-um 55@28"

Offline TxMoon

  • Trad Bowhunter
  • **
  • Posts: 142
Re: Removing oil from a sharpening stone?
« Reply #5 on: August 12, 2009, 06:52:00 AM »
dish soap and hot water. hot water opens the pores in the stone dish soap takes the oil away. Carb cleaner will work I would not use it on a old quality stone. A cheap new stone carb cleaner work the best good luck.
Logged
Technique and Knowledge is the largest factor in being able to build a good knife. Lin Rhea

Offline Oliverstacy

  • Trad Bowhunter
  • **
  • Posts: 1915
Re: Removing oil from a sharpening stone?
« Reply #6 on: August 12, 2009, 09:32:00 PM »
I'm going to try the dish soap first and see what happens...I'll go with other compounds if that doesn't work.

This reminds me of when I was a kid cleaning my muzzleloader...hot water and dish soap.

Thanks for the help!

Josh
Logged
Custom Flemish Strings by Oliverstacy!  
Kanati 60" 57@29"
AP Cumberland 66" 58@29"
WhisperStik KajikaStik 56" Recurve with Canebrakes...57@28"
WhisperStik KajikaStik aka "Wormy" RC & LB,both 55@29"
Martin Savannah 50@28"
Kota Kill-um 55@28"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©