My First

[wissler]

01 Carbon tool steel blade "Bushcraft type",with a scandi grind, Pacific Yew scales with brass pins and lanyard tube. CA Glue finish.
I thought I'd start with a blade already done, and add the rest.
 
 
 
 
 
 
 
 


Many lessons learned, like:
-Always wear a respirator and goggles when cutting and sanding wood and glue.
-Never touch a finished blades edge to a moving sanding belt.
-Don't leave your finger in 1 place for more than 3 seconds with CA glue on it(you'll have to sand your skin off of the handle)LOL

Thanks to all of you guys who have been teaching ME without knowing it!

[Lin Rhea]

A fine job. You should be proud. Lin  

[DANA HOLMAN]

Looks good, but once you start you can't stop
dana

[prarieboy]

Lookin good! Betcha can't make just one!!!!!

[Steve Nuckels]

Nice!  Love the Yew!

Steve
----------
Potomac Forge
----------
IN GOD WE TRUST

[fixer]

Good job!!!  

[wissler]

Thanks guys, I've been reading past threads trying learn all I can.

Dana, You're right, I can't stop. I have a Craig Barr blank on the way, and I'm already shopping around for a spindle sander!

Steve, Yew is my personal favorite!
(I was thinking about using some cocobolo also, that came from the Bruin recurve in the pic, but right after I sliced into it, I had a wicked asthma attack and will wait to use the coco in spring....outside!)
PS I wasn't using my respirator at first because I was so excited to get started!!!
IT WILL NEVER HAPPEN AGAIN!! NEVER

[chris amos]

Nice job! Looks like it fills the hand well!