INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Anvil stands  (Read 383 times)

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Anvil stands
« on: June 29, 2010, 12:31:00 AM »
What do you guys like for anvil stands? My big chunk of wood is finaly gonna split so I'm looking for ideas. If I use a stump again I'm gonna rawhide it.
Logged

Offline kuch

  • Trad Bowhunter
  • **
  • Posts: 781
Re: Anvil stands
« Reply #1 on: June 29, 2010, 06:06:00 AM »
many  ways to skin that cat.stump, 6x6 banded together, welded box with sand, etc.
Logged

Offline madness522

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1743
Re: Anvil stands
« Reply #2 on: June 29, 2010, 06:28:00 AM »
I just built one that has 2 x 4 x 1/4" legs with 1/2" pads and a 12 x 18 x 1" top.  Weighs about 80 pounds and it only cost me like $40 for the steel at the scrap yard.  Plus another well spend $20 for them to cut the top to size.  Now I just need to get it painted.
Logged
Barry Clodfelter
TGMM Family of the Bow.

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: Anvil stands
« Reply #3 on: June 29, 2010, 07:42:00 AM »
Logged
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline Tique

  • Trad Bowhunter
  • **
  • Posts: 581
Re: Anvil stands
« Reply #4 on: June 29, 2010, 07:45:00 AM »
Here's a few:  www.anvilfire.com/iForge/tutor/jd_stand/index.htm

I just built one with 2x12s and plywood; works great.
Logged
Untested ideas are not facts.

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Re: Anvil stands
« Reply #5 on: June 29, 2010, 09:42:00 AM »
Thanks guys, just what I was looking for. I have two big anvils so I'll most likely have one that won't move and a portable stand.
I have a meatal stand for one that is to high, may be able to cut it down although the bottom is a very large casting.
Logged

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: Anvil stands
« Reply #6 on: June 29, 2010, 10:41:00 AM »
Like Jeremy said!  Anvil Stands   I built Figure #22 stand that I think performs very well.  And I have worked on an anvil using Figure #11.

Steve
--------
Potomac Forge
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©