My 1st Knife (Courtesy of Ragnarok)

[gudspelr]

Ragnarok Forge (Clay) recently posted a thread with pictures from the trip I took to his place.  I had a great time learning about forging and even got to come away with a knife.  Work kept me busy this week, but I managed to finish up the knife he sent me home with.  I rounded the front edge of the handle and put a Cocobolo button on the end.  I couldn't find a decorative pin for the end that I liked so I settled on a small piece of steel rod.  It's a long ways from what you guys make, but it was a lot of fun and I can't wait to make some more.  Thanks again, Clay-couldn't have done it without you    .

 


 


 


Now to make a sheath...

Jeremy

[TheBigRedArcher]

Looks good. I like the cocobolo button idea.

TBRA

[gudspelr]

Yeah, I got that idea from Clay, too.  He had some Colonial era knives he had done and finished them off with wood and a decorative headed nail.  The wood seemed to give a nice end instead of the bare cutoff.


Jeremy

[Ragnarok Forge]

I like how you put the finishing touches on the knife.  You did a great job on your first knife.  Starting and getting to 95% finish on a knife in one day is a great start to your bladesmithing.  I look forward to seeing more knives in your future.

I just got access to a bunch of wood mill band saw blades that are 1/16 and 1/8 inch think.  They will make good neck and sheath size knives. When I get the material in hand I will cut up a bunch of rectangular pieces and send them your way for stock material.  I will be getting the soft brick sent your way this week.  I still have not located that other string I made for your bow.  I think the cat drug it off somewhere.

[Steve Nuckels]

Jeremy, Great looking knife for sure!  You are off to a great start!

Steve
-------
Potomac Forge

[gudspelr]

Thanks for the compliments-pretty sure any success was due to Clay's patience   .  

Clay, thanks for your generosity.  I'm hoping to send some stuff for you this week, as well.  Actually, half of it's for Blue-love that dog.  As for the string, I think it might be worth getting one of those paranormal experts over there-you could have some sort of black hole hiding under your couch....

Jeremy

[Blackwidow36]

Nice knife. Have you made broad heads ? I made one out of 1"steel pallet banding it seems to be ok have not shot it yet just wanted some input.

[Ragnarok Forge]

Jeremy,

I did a little digging around the torch you want to buy for the mini forge is a Bernzomatic BZ 8250 torch that burns propylene.  The torch should run around $70.  Buy the fat boy bottles for it.

[gudspelr]

Blackwidow36-

No, only thing I've made is the knife.  Would be pretty cool to make some broadheads to go hunting with, though.

Clay-

Thanks for the info on the torch-I'll take a look around and see what I can't find.  Does propylene burn differently than propane or that Mapp (sp?) gas you were telling me about?  Oh, and the "rosebud" type of tip, right?  Thanks for the help

Jeremy

[Sgt. Graves]

Beautiful knife. Now you are hooked.

[prarieboy]

Great start!

[Ragnarok Forge]

The torch number I gave you should have the rosebud tip on it.  Propylene is the replacement for the MAPP gas.  It runs at a lower pressure, yet burns a bit hotter than MAPP.

[gudspelr]

Thanks Clay-will hopefully have one in the semi-near future...gotta save some pennies...  


Jeremy