INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Forge photo  (Read 674 times)

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Forge photo
« on: April 01, 2011, 12:51:00 PM »
I got my inspiration to take this photo from a topic Lin posted some time ago that showed him with his arm on his forge.
I've got a bunch of Damascus to forge up in the next few weeks, and since I have not "tweaked" my forge in about three years, I thought it might be a good idea to re-line it and prep it for the upcoming stint.
Now, keep in mind that this forge has been running for approximately 20 minutes.
I'm sure I could be welding Damascus in it at this temp which needs to be about 2250 degrees.
I rolled my sleeves up and did what you see here.
I also have a laser non-contact thermometer and checked the outer temps.
The side where my hand is was at 55 degrees.
The top was 57 degrees.
 
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline JMR

  • Trad Bowhunter
  • **
  • Posts: 514
Re: Forge photo
« Reply #1 on: April 01, 2011, 01:54:00 PM »
That's really cool Karl it proves your insulation is working very well
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Forge photo
« Reply #2 on: April 01, 2011, 02:08:00 PM »
Karl, watch out on your first billet. I got mine too hot and ruined it. I was not used to getting it that hot. It came up to welding heat fast. Good job.
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: Forge photo
« Reply #3 on: April 01, 2011, 02:15:00 PM »
I've noticed already on my first blade that I had back down the gas and air flow.
I just did a better job on the insulation and refractory than I did the first time.
Now I can be like you!
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Forge photo
« Reply #4 on: April 01, 2011, 02:40:00 PM »
Oh, please. Set your sights higher than that!
                 
              :scared:
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: Forge photo
« Reply #5 on: April 01, 2011, 02:57:00 PM »
That's amazing Karl,can't do that on mine its hotter than hell on the outside.
Logged

Offline OconeeDan

  • Trad Bowhunter
  • **
  • Posts: 1685
Re: Forge photo
« Reply #6 on: April 01, 2011, 11:35:00 PM »
Wow, looks efficient!
Dan
Logged

Offline MT Longbow

  • Trad Bowhunter
  • **
  • Posts: 766
Re: Forge photo
« Reply #7 on: April 01, 2011, 11:40:00 PM »
kinda like the space shuttle skin!
Logged
Craig Ekins;
70" -60LB "Robin Hood",string follow  #47 of 50. LE
68" -70Lb Redman, string follow all YEW. "Yewlogy"
68" -75Lb@28. 3 lam Boo. String Follow- "LegendStick"

Ron Maulding : 68" Big Horn , Boo and Osage. 78#@27.

David Miller: Old Tom

Offline Bryan Bondurant

  • Trad Bowhunter
  • **
  • Posts: 168
Re: Forge photo
« Reply #8 on: April 02, 2011, 01:54:00 AM »
Nice looking forge there Carl.
Logged

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: Forge photo
« Reply #9 on: April 02, 2011, 07:31:00 AM »
So without your post of the temps this would only prove that you are just one tough SOB  :)  

Seeing this makes me want to inprove mine from a bunch of stacked fire bricks that bleeds heat all over the place.  I have a small decomissioned propane tank that is probably 1 1/2X the size of the tank on your grill.  I have been planning to fab one out of this for a long time.  May be time to do just that.

Thanks Mr. Anderson
Logged

Offline seven crows

  • Trad Bowhunter
  • **
  • Posts: 178
Re: Forge photo
« Reply #10 on: April 06, 2011, 01:49:00 PM »
very efficient , probably cheaper to run as well hah? 7C
Logged

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: Forge photo
« Reply #11 on: April 06, 2011, 04:28:00 PM »
Karl,

Until I read your post, I was looking at the picture and thinking it was Superman! That is really neat.

Allan
Logged
TGMM Family of the Bow
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©