INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: 15" Bowie (OLD YELLER)  (Read 934 times)

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
15" Bowie (OLD YELLER)
« on: May 15, 2011, 08:54:00 PM »
This is 1/4" 5160 with a 10" blade OAL is 15" Brass finger guard and 1/2" spacer with osage handle. I got to thinking awhile back about the ABS test knife, and was wondering if i could build one that would pass the test, so after reading alot from the ABS web site i forged this one, and this is what i ended up with. A BIG Thank You to Lin, for all his information on what to do next. (I called alot)
This knife has been a bear to build, first handle split and had to replace it. I think it turned out ok, but let me know what you think.

 
 

I have cut the rope and chopped some wood with no chips or roles on the edge, it passed the brass rod test as well. the only thing left to do is  bend it. i dont know if i can, i have put about 60 hr. in this knife
Thanks for looking
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Steve Nuckels

  • Trad Bowhunter
  • **
  • Posts: 2155
Re: 15" Bowie (OLD YELLER)
« Reply #1 on: May 15, 2011, 09:07:00 PM »
Dana, that is most impressive brother!  You do great work for sure!

The only thing I would say is I like softer lines on the handle.

Thanks for sharing!

Steve
-------
Potomac Forge
Logged

Offline JMR

  • Trad Bowhunter
  • **
  • Posts: 514
Re: 15" Bowie (OLD YELLER)
« Reply #2 on: May 15, 2011, 09:17:00 PM »
Dana, great looking knife and I can understand why you would not want to bend/break it. 60 hrs is a lot of time invested and if you are like me your knives become part of you by the time they are finished. Getting a chance tobtake that step towards ABS certification might make it worth the "pain" though.   :goldtooth:
Logged

Offline srtben

  • Trad Bowhunter
  • **
  • Posts: 851
Re: 15" Bowie (OLD YELLER)
« Reply #3 on: May 15, 2011, 09:20:00 PM »
Don't bend it! Ugly knives are for testing, that one is to pretty.
Logged
Ben Tendick

God, Family, Friends.

Offline MTArrowLauncher

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 561
Re: 15" Bowie (OLD YELLER)
« Reply #4 on: May 16, 2011, 01:12:00 AM »
That is a beauty, don't bend it, send it to me.   :)
Logged
>>>---TGMM Family of the Bow--->

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: 15" Bowie (OLD YELLER)
« Reply #5 on: May 16, 2011, 07:53:00 AM »
That's a true beauty right there.
Be tough to ruin that.
Now, having made one that passes SOME of the performance qualifications, why not take what you learned on this one and see if you can build another one?
Then, build it knowing up-front that you'll be destroying it.
Actually, why not make two exactly the same?
And if one passes, use the remaining one for the actual Performance Test?
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: 15" Bowie (OLD YELLER)
« Reply #6 on: May 16, 2011, 08:38:00 AM »
Thanks guys,
Steve I see what you mean about the handle, it could use a little softer lines but it feels good.
Karl your right, my next knives will be a set of test knives, knowing that I'll break one, I had really planed to break this one, but after the h--- it gave me, I'll keep it. I really feel that it will pass the bend test. Pro's like you make us new guys think in different directions
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline kbaknife

  • Trad Bowhunter
  • **
  • Posts: 2670
Re: 15" Bowie (OLD YELLER)
« Reply #7 on: May 16, 2011, 09:27:00 AM »
With Lin's tutelage, you can't go wrong.
Logged
When the last deer disappears into the morning mist,
When the last elk vanishes from the hills,
When the last buffalo falls on the plains,
I will hunt mice for I am a hunter and I must have my freedom.
Chief Joseph

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: 15" Bowie (OLD YELLER)
« Reply #8 on: May 16, 2011, 09:53:00 AM »
:thumbsup:    :thumbsup:    :thumbsup:    :thumbsup:    :thumbsup:    :thumbsup:    :thumbsup:    :thumbsup:

Remembert Make Each Knife A Little Better Than The Last!!!!
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: 15" Bowie (OLD YELLER)
« Reply #9 on: May 16, 2011, 10:03:00 AM »
Yea, right    :laughing:    

What Karl suggests is a pretty good idea. If you decide to make another, go ahead and write down your complete procedure while it's fresh on your mind, then make another. OR, even better, go ahead and test this one and you can tweak the next one if it's necessary.

What ever you decide, eventually you will have to do some testing that includes the bend test, not break test.     :nono:     One thing to notice in the bend/flex part of the test is that there is a range within the ability of the steel that are sort of the extremes that the steel will allow. In other words you can heat treat the blade to bend with very little flex ( remember there is a difference between bending and flexing )to 90 degrees, which will pass the test, or you can heat treat it to flex to 90 degrees and spring back nearly straight which will also pass. The second way is much better in the real world, but to be safe I would just lean to the first scenario. In the real world, the first scenarion might concievably bend and take set in a severe chopping setting, if you make a mis lick and hit a little to the side of the blade. That's not good.

So, from this I guess you may gather that my knives that are not test knives are heat treated a little stiff. I think it helps them cut better, but that's just me.
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline amar911

  • Trad Bowhunter
  • **
  • Posts: 2860
Re: 15" Bowie (OLD YELLER)
« Reply #10 on: May 16, 2011, 10:17:00 AM »
Dana,

You have created a great knife. The blade is very beautiful in its simplicity of shape and wonderful functionality. I think it would be the perfect large camp knife. Of course, I don't know exactly how it would perform, but I suppose that is what the tests are for, and it sounds like the knife will pass most of those, except you don't know about the bend test. I sure hate to have a knife like that destroyed in testing; however, you will never know what it is really like until you do. Making a knife that isn't as pretty to bend up is definitely a good option as opposed to ruining a knife as nice as this one. Best to you in your quest toward receiving your JS.

Allan
Logged
TGMM Family of the Bow

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: 15" Bowie (OLD YELLER)
« Reply #11 on: May 16, 2011, 10:33:00 AM »
Guys, if I build two more, how far would you finsh it, this one is 600 grit, I really want someone to look at it and tell me what I need to work on before I build another one, any of the JS or MS. I'll mail it to you, let me know
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Doug Campbell

  • Trad Bowhunter
  • **
  • Posts: 2608
Re: 15" Bowie (OLD YELLER)
« Reply #12 on: May 17, 2011, 12:45:00 AM »
Very nice Dana, it is tough to bend one after putting all that work into them but it is a great feeling to know you done every thing right...  

If I were building one strictly to bend/destroy I wouldn't worry about going past a very good 400 grit. Just make durn sure all your grit lines are running lengthwise.
Logged
Life is wonderful in Montana!!
"BEING CHALLENGED IN LIFE IS INEVITABLE. BEING DEFEATED IS OPTIONAL."
ABS Journeyman Knifesmith

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: 15" Bowie (OLD YELLER)
« Reply #13 on: May 17, 2011, 08:23:00 AM »
Thanks Doug, hope to start on the new ones this weekend,
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: 15" Bowie (OLD YELLER)
« Reply #14 on: May 17, 2011, 08:43:00 AM »
You might just want to forge full tang,not worrying about the wooden handle. At the Moran School we just rapped paper towels around and taped for handles.(if your going to cut things before bending).
Also will need laylard hole (for safety)
Also make pipe to put over it before bending I can send pics if you need.
Logged

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: 15" Bowie (OLD YELLER)
« Reply #15 on: May 17, 2011, 08:55:00 AM »
Kevin
i thought it would have to be a finshed knife, to insure that you handle and guard was done right, send me some pictures, i would like to see them.
i edited this because i read the first line again
thanks
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline Kevin Evans

  • Trad Bowhunter
  • **
  • Posts: 1148
Re: 15" Bowie (OLD YELLER)
« Reply #16 on: May 17, 2011, 09:33:00 AM »
Dana e-mail me through regular mail at
[email protected]
That way I won't have to download through photobucket
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: 15" Bowie (OLD YELLER)
« Reply #17 on: May 17, 2011, 10:07:00 AM »
Dana,
      If you are going to actually take the JS test, it has to be a full tang handle. For the MS test, it has to be a hidden tang. There is no stipulation as to the degree of finish, but I believe a smooth finish contributes to the blades toughness.
      For any informal testing you can do what you want of course.
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: 15" Bowie (OLD YELLER)
« Reply #18 on: May 17, 2011, 11:01:00 AM »
Lin, Thanks, i must have read that wrong, i'll reread the site. but if i can make a hidden tang that would pass that would be good to.
dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©