INFO: Trad Archery for Bowhunters



Author Topic: Deer hide for a sheath?  (Read 326 times)

Offline David Dumke

  • Trad Bowhunter
  • **
  • Posts: 154
Deer hide for a sheath?
« on: September 21, 2011, 12:16:00 AM »
So I bought hunting knives today. Remington is the brand, I know some of you might be more apt to buy a local maker knife or some thing but there were 3 for 20 bucks and I liked the way the looked. I sharpened them a little when I got them out and they can take the hair off my arm, haha.

I HATE this case though! I take out the biggest one and there is residue from the sheath on the blade. I am thinking that this will cause the blades to dull because it's obviously cutting the inside.

All the blades have this issue. My question is, though it isn't season yet and I haven't gotten a deer and very well may not, is deer hide good for making a sheath or should I look elsewhere? I really want to keep the hide on my first deer regardless of when it may happen but I'm debating between just keeping it as a memento or trying to craft with it.

tips or suggestions? Thanks.

Pictures of the knives tomorrow, right now it's time for bed.
Hoyt Game Master TD Recurve- 48#'s @ 28"

Checkmate Hunter TD Recurve- 59#'s @ 28"

Offline Ron LaClair

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5405
Re: Deer hide for a sheath?
« Reply #1 on: September 21, 2011, 08:29:00 AM »
The inside of your sheath will wear in eventually, don't woory about it dulling the blade. Deer skin is too thin to protect the knife, you need a thicker heavier leather for the body of the sheath. You could cover the sheath that you have with deer skin, it gives it a unique frontier look. A little leather glue to adhere the deerskin to the sheath will do the trick.

Here's a sheath that I did.


     

   
We live in the present, we dream of the future, but we learn eternal truths from the past
When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice.
Life is like a wet sponge, you gotta squeeze it until you get every drop it has to offer

Offline David Dumke

  • Trad Bowhunter
  • **
  • Posts: 154
Re: Deer hide for a sheath?
« Reply #2 on: September 21, 2011, 09:05:00 AM »
Unable.to resize at the moment but here's a link to the knives.
 http://i1194.photobucket.com/albums/aa374/daveoodoes/2011-09-21_07-59-01_918.jpg
not sure if the deerhide glue on would work for the sheath for these knives but I sure do like the look of it.
Hoyt Game Master TD Recurve- 48#'s @ 28"

Checkmate Hunter TD Recurve- 59#'s @ 28"

Offline Frenchymanny

  • Trad Bowhunter
  • **
  • Posts: 2379
Re: Deer hide for a sheath?
« Reply #3 on: September 21, 2011, 09:10:00 AM »
Ron, beautiful knife, beautiful sheath!   :clapper:    :clapper:    

F-Manny
Coureur des Bois
Big Jim: Buffalo Bows 62" 60@27 & 65@27 ThunderChilds 56" 62@27 & 62@27 Desert BigHorn 59@27
ML, Shrew &TC Knives
With a sturdy bow, a true shaft, and a stout heart, we journey forth in
search of adventure.

Dr. Saxton Pope

Offline Ron LaClair

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5405
Re: Deer hide for a sheath?
« Reply #4 on: September 21, 2011, 10:11:00 AM »
David, if you look close you can see that I've also got it laced along the edges of the sheath. Do you have a picture of the sheaths that you have? Go to the knife forum, maybe they can help you.
 http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=forum;f=110
We live in the present, we dream of the future, but we learn eternal truths from the past
When you were born, you cried and the world rejoiced. Live your life so that when you die, the world cries and you rejoice.
Life is like a wet sponge, you gotta squeeze it until you get every drop it has to offer

Offline snakewood3

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1093
Re: Deer hide for a sheath?
« Reply #5 on: September 21, 2011, 08:16:00 PM »
Deer rawhide from the top of the neck area is thick enough. Been using it for years with no problem.
U.S. Navy Seabees '79 - '86
Custom knives and leatherwork

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©