INFO: Trad Archery for Bowhunters



« previous next »
Pages: [1]   Go Down

Author Topic: Home made Dremel table  (Read 1195 times)

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Home made Dremel table
« on: May 26, 2012, 06:30:00 PM »
I have been frettin over a knife that I had to build knowing that to be true to the original plan, I had to have a black line in the fittings. I usually use a black fiber spacer, pretty thin but enough to show a line for contrast.

This particular knife has damascus fittings and I hated the thought of making thin spacers from damascus. So, I decided to try to cut a thin groove around the fitting to give the look since it should black out in the etch. I'm pleased with the way it worked.

 
 
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Bill Kissner

  • Trad Bowhunter
  • **
  • Posts: 1048
Re: Home made Dremel table
« Reply #1 on: May 26, 2012, 07:52:00 PM »
Can't wait to see the finished knife!
Logged
Time spent alone in the woods puts you closer to God.

"Can't" never accomplished anything.

Offline akaboomer

  • Trad Bowhunter
  • **
  • Posts: 958
Re: Home made Dremel table
« Reply #2 on: May 26, 2012, 08:54:00 PM »
Very ingenious!!!! That's using the best tool a maker can use, your mind!!!!  Well done sir.

Chris
Logged

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Home made Dremel table
« Reply #3 on: May 26, 2012, 09:30:00 PM »
Me too Bill. Cant wait to see it finished!  :D  

Thanks Chris
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: Home made Dremel table
« Reply #4 on: May 26, 2012, 09:44:00 PM »
Lin, I love seeing creative ideas like that as apposed to getting it machined/die cut.
Logged
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Home made Dremel table
« Reply #5 on: May 26, 2012, 09:45:00 PM »


   

   
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Pete Crowl

  • Trad Bowhunter
  • **
  • Posts: 37
Re: Home made Dremel table
« Reply #6 on: May 26, 2012, 09:51:00 PM »
That is just the coolest tool!   :cool:
Logged
Pete Crowl

Blade Show Table 8 R

ABS Journeyman

Offline DANA HOLMAN

  • Trad Bowhunter
  • **
  • Posts: 1252
Re: Home made Dremel table
« Reply #7 on: May 26, 2012, 10:32:00 PM »
Lin, you are smarter then the average Bear. can't wait to see it.
thanks for the all the tips you share.
Dana
Logged
"When Satan is knocking at your door,
Simply say,

 "Jesus, could you get that for me?"

Offline ScottA

  • Trad Bowhunter
  • **
  • Posts: 24
Re: Home made Dremel table
« Reply #8 on: May 27, 2012, 09:38:00 AM »
Great !

I envision an inverted version of yours with my mini drill press    :)
Logged
fill each day with adventure & peace be with you

Offline ScottA

  • Trad Bowhunter
  • **
  • Posts: 24
Re: Home made Dremel table
« Reply #9 on: May 27, 2012, 09:40:00 AM »
Great !

I envision an inverted version of yours with my mini drill press    :)
Logged
fill each day with adventure & peace be with you

Offline Colorado Joe

  • Trad Bowhunter
  • **
  • Posts: 96
Re: Home made Dremel table
« Reply #10 on: May 27, 2012, 03:12:00 PM »
Those are some pretty guards.
I noticed dimples in by the tang hole. Is that to give a press fit or accept glue?
Logged
Hickory backed Ipe with a Zebrawood accent.
70" ntn
40#
Samick Sage
40#
Housel Osage stick (High country Elk stopper)
48"
55#
"If I had only known, I would have been a locksmith."
-- Albert Einstein

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Home made Dremel table
« Reply #11 on: May 27, 2012, 07:14:00 PM »
Joe,
    It's to tighten the hole a little to stop any slop. The front of the hole is slightly tighter anyway. I bell out the back somewhat. In the event the guard needs to drift only one way, I can punch only one side.
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Lin Rhea

  • Trad Bowhunter
  • **
  • Posts: 4541
Re: Home made Dremel table
« Reply #12 on: May 27, 2012, 09:11:00 PM »
Here's the whole knife. Just got done. I'll get better pics this week. The blade is 8 inches.  

 
Logged
"We dont rent pigs." Augustus McCrae
ABS Master Bladesmith
TGMM Family of the Bow
Dwyer Dauntless longbow 50 @ 28
Ben Pearson recurve 50 @ 28
Tall Tines Recurve 47@28
McCullough Griffin longbow 43@28

Offline Ray Hammond

  • Trad Bowhunter
  • **
  • Posts: 5824
Re: Home made Dremel table
« Reply #13 on: May 27, 2012, 09:18:00 PM »
Ooooooweeeee Lin that's purty!!!!!
Logged
“Courageous, untroubled, mocking and violent-that is what Wisdom wants us to be. Wisdom is a woman, and loves only a warrior.” - Friedrich Nietzsche

Offline Craig B

  • Trad Bowhunter
  • **
  • Posts: 36
Re: Home made Dremel table
« Reply #14 on: May 28, 2012, 10:25:00 AM »
That dremel table is pretty slick Lin! Beautiful knife too
Logged

Offline TheBigRedArcher

  • Trad Bowhunter
  • **
  • Posts: 255
Re: Home made Dremel table
« Reply #15 on: May 28, 2012, 05:46:00 PM »
I guess the saying of "necessity is the mother of invention" is definitely true. That knife looks awesome Lin. There is a reason you have the title master smith.

TBRA
Logged

Offline Bladepeek

  • Trad Bowhunter
  • **
  • Posts: 3318
Re: Home made Dremel table
« Reply #16 on: May 29, 2012, 08:22:00 PM »
Been away from this thread for a few days. Sure came back at the right time! Beautiful.
Logged
60" Bear Super K LH 40#@28
69" Matt Meacham LH 42@28
66" Swift Wing LH 35@28
54" Java Man Elk Heart LH 43@28
62"/58" RER LXR LH 44/40@28
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©