INFO: Trad Archery for Bowhunters



Author Topic: Tandy Magnets  (Read 919 times)

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Tandy Magnets
« on: June 11, 2014, 06:30:00 PM »
Just For Your Info...

I needed some Kydex supplies so luckily for me there is a great Tandy Leather store within 15 minutes of me.  I mainly use Kydex for neck knife sheaths.  While talking with the sales person, I mentioned leather neck sheaths needed a good magnet to hold a knife.  He said these magnets were a new addition...very strong & very thin.  I'm impressed for adding these to hold a knife upside down.  These are the mid & large size with two to a pack ...tippit

     
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline just_a_hunter

  • Corporate Sponsor
  • Trad Bowhunter
  • ****
  • Posts: 1086
Re: Tandy Magnets
« Reply #1 on: June 11, 2014, 07:04:00 PM »
Hey!!! Thanks for posting this.

I have been thinking about putting a magnet in the blade portion of my sheath shims for extra retention if the strap fails. I've built a scale nest so to speak and that really helps. I also try to get the welt a few thousands thinner than the blade so the leather hugs it good but one of these puppies inlayed in the inner shim(s) to help level the knife will probably be the cats meow.

   

   


I'm gonna give it a try... Thanks again!

Todd
"Before you get down on yourself  because you don't have the things you want, think of all the things you DON'T want that you don't have."

You'll notice the "luckiest" elk hunters have worn out boots.

Offline Doug Campbell

  • Trad Bowhunter
  • **
  • Posts: 2608
Re: Tandy Magnets
« Reply #2 on: June 12, 2014, 12:02:00 AM »
Jeff, put one on each side with the apposing poles facing each other. They push each other apart till the blade goes then then clamp down. very thin liner leather keeps them from scratching the finish. Been doing it that way for years on neckers with no problems.
Life is wonderful in Montana!!
"BEING CHALLENGED IN LIFE IS INEVITABLE. BEING DEFEATED IS OPTIONAL."
ABS Journeyman Knifesmith

Offline gudspelr

  • Trad Bowhunter
  • **
  • Posts: 990
Re: Tandy Magnets
« Reply #3 on: June 12, 2014, 05:38:00 AM »
Thanks for putting this up. How thin are those magnets?


Jeremy
"Have nothing in your house that you do not know to be useful, or believe to be beautiful."
- William Morris

Craftsmen strive to make their products both.

Offline madness522

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1743
Re: Tandy Magnets
« Reply #4 on: June 12, 2014, 08:01:00 AM »
Quote
Originally posted by Doug Campbell:
Jeff, put one on each side with the apposing poles facing each other. They push each other apart till the blade goes then then clamp down. very thin liner leather keeps them from scratching the finish. Been doing it that way for years on neckers with no problems.
Every day I learn something! Thanks Doug! I never thought to use 2 set to apposing poles. I wasn't smart enough to figure that out myself. I used one and the retention wasn't at a level I was comfortable with carrying a knife around my neck.
Barry Clodfelter
TGMM Family of the Bow.

Offline Roughcountry

  • Trad Bowhunter
  • **
  • Posts: 1112
Re: Tandy Magnets
« Reply #5 on: June 15, 2014, 11:53:00 PM »
If you look on the big auction site under rare earth magnets you can find very strong magnets of dang near every size. You have to be pretty careful with the rare earth mag's as they will com together hard enough to shatter. Or the big ones can break fingers.
I've used them in leather for holding all sorts of things.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©