INFO: Trad Archery for Bowhunters



Author Topic: First go at Kydex..  (Read 975 times)

Offline just_a_hunter

  • Corporate Sponsor
  • Trad Bowhunter
  • ****
  • Posts: 1086
First go at Kydex..
« on: June 20, 2014, 09:27:00 PM »
I've been experimenting with Kydex sheath making. I'm pretty happy with how its turning out. Lots of pros over cons vs. leather but it sure isn't as purty. Way easy to make ambidextrous and lots of different carry options.

   
   
 

Thanks for looking,

Todd
"Before you get down on yourself  because you don't have the things you want, think of all the things you DON'T want that you don't have."

You'll notice the "luckiest" elk hunters have worn out boots.

Offline D.Ellis

  • Trad Bowhunter
  • **
  • Posts: 956
Re: First go at Kydex..
« Reply #1 on: June 21, 2014, 01:43:00 AM »
Holey Fasteners Batman! I think you might have missed an eyelet or 2 there, I can still see some plastic showing   :smileystooges:    :D    
I have used kydex in the past, and it works fine, but I just can't warm up to it personally. It does have it's advantages though.

Darcy   :campfire:
60# GN Lil'Creep Jackknife
67# osage selfbow
62# "Zang Hill" string follow

Offline Bobby Urban

  • Trad Bowhunter
  • **
  • Posts: 1211
Re: First go at Kydex..
« Reply #2 on: June 21, 2014, 06:55:00 AM »
I agree with Darcy and you that it doesn't have the look, feel or feeling of good ole leather but it sure is nice.  It is easy to keep clean and dry, super light weight and simple to use.  I prefer it for my personal knives for all of the above because I never carry on my belt and just make a kydex cover for the blade and slip the whole thing into my pack.  Less bulk and weight.  

x2 on the fasteners - you will find the rigidity of the kydex allows you to use only a couple of the rivets with equal results.  Nice work BTW

Offline just_a_hunter

  • Corporate Sponsor
  • Trad Bowhunter
  • ****
  • Posts: 1086
Re: First go at Kydex..
« Reply #3 on: June 21, 2014, 07:17:00 AM »
Now Darcy,... You know as well as the keyboard you type on Batman likes options... lol...

I could have went one way or the other no doubt with the eyelets or rivits but I actually misplaced one of them and drilled too big of a hole in another and the only way I felt to save it was kind of make them even throughout even though it looks like the poor sheath got in a fight with the drill press.

Thanks for the comments!

Todd
"Before you get down on yourself  because you don't have the things you want, think of all the things you DON'T want that you don't have."

You'll notice the "luckiest" elk hunters have worn out boots.

Offline tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6241
Re: First go at Kydex..
« Reply #4 on: June 21, 2014, 10:46:00 AM »
I love Kydex especially for my Bare Bone no handle blades...neckers and pack blades.  Either with rivets, eyelets, Chicago screws, or with my two blade hog skinner/stripper set just a tight sandwich for my pack...tippit

   
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Track

  • Trad Bowhunter
  • **
  • Posts: 553
Re: First go at Kydex..
« Reply #5 on: June 25, 2014, 07:44:00 PM »
Looks good for the first one.

Offline tomsm44

  • Trad Bowhunter
  • **
  • Posts: 1340
Re: First go at Kydex..
« Reply #6 on: June 27, 2014, 12:07:00 AM »
Has anyone ever tried wet molding a piece of leather around a kydex sheath, then drilling and stitching?  May be more trouble than it's worth, but might give the best of both worlds.  That looks about as good as kydex can, by the way, and should make a tough sheath.

Matt
Matt Toms

Flatwoods Custom R/D:  64", 47@28
'66 Kodiak: 60", 55@28
Redwing Hunter:  58", 53@28
Ben Pearson 709 Hunter:  58", 47@28
Ben Pearson 709 Hunter:  58", 42@28
Hoots Recurve:  56", 42@28

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©