« previous next »
Pages: [1]   Go Down

Author Topic: cutting out two wood riser?  (Read 1628 times)

Offline granny

  • Trad Bowhunter
  • **
  • Posts: 46
cutting out two wood riser?
« on: August 28, 2008, 11:41:00 AM »
How do you go about cutting the woods for a two(different) wood riser? Some of the bows you see have a fancy flare in the riser with contrasting wood. How do you cut both woods to make them match?
Logged

Offline BMN

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1648
Re: cutting out two wood riser?
« Reply #1 on: August 28, 2008, 03:53:00 PM »
It's normally done with a jig or fixture on a bandsaw and some careful sanding for final fit up. Here are some pics I copied off the internet as an example.

 

 

 
Logged
Compton Traditional Bowhunters
Professional Bowhunters Society
Prairie Traditional Archers
TGMM Family of the Bow

The most frightening thing you are likely to encounter in nature is yourself.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: cutting out two wood riser?
« Reply #2 on: August 28, 2008, 08:09:00 PM »
Yep,thats about what I use!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: cutting out two wood riser?
« Reply #3 on: August 29, 2008, 07:43:00 AM »
wow that looks kool... I should try that no a bow I want to do this winter..
Logged

Offline granny

  • Trad Bowhunter
  • **
  • Posts: 46
Re: cutting out two wood riser?
« Reply #4 on: August 29, 2008, 09:52:00 AM »
Thanks for the reply. I will try my hand at this on the next bow i make.
Logged

Offline elk ninja

  • Trad Bowhunter
  • **
  • Posts: 1024
Re: cutting out two wood riser?
« Reply #5 on: August 29, 2008, 05:42:00 PM »
Yup, pretty close to the jig I made and use.
Mike
Logged
>>>--Semper-Fi--->

It is better to remain silent and be thought a fool than to open one's mouth and remove all doubt.
-Abraham Lincoln
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©