« previous next »
Pages: [1]   Go Down

Author Topic: first bow.  (Read 1346 times)

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
first bow.
« on: September 05, 2008, 10:30:00 AM »
i am fixing to make my first board bow out of red oak.  i know not the best wood but it was all the lumber yard had at the time.  i am going to try to go for pyrimid stlyle limbs  and shooting for around 55# or 60#.  any tips, coments are more than welcome.  even if i break it at least it wont cost me a alot of money.
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Apex Predator

  • Trad Bowhunter
  • **
  • Posts: 3372
Re: first bow.
« Reply #1 on: September 05, 2008, 10:46:00 AM »
Keep it long.  What is your draw length?
Logged
I didn't claw my way to the top of the food chain to eat vegetables!

Offline **DONOTDELETE**

  • Trad Bowhunter
  • **
  • Posts: 10441
Re: first bow.
« Reply #2 on: September 05, 2008, 01:18:00 PM »
68-70" bow,  Mine is a 70" n2n pyramid bow 51#@24".. shooting both 60-65" BOP 29.5" 160 grn points & 55-60" BOP 27.75" 160 grn points. The 55-60's shoot better. It is also cut 1/8" Before Center.


Good Luck and take your time.
Logged

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: first bow.
« Reply #3 on: September 05, 2008, 01:32:00 PM »
it looks like i might be a little lighter that i was going to shoot for but thats ok.  i have it shaped and now i have to do the tillering.  this is a first for mme so i will most likely break it in this process.. but thats learning its 66" right now.   we will see what happens in the next few hours.
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: first bow.
« Reply #4 on: September 05, 2008, 02:00:00 PM »
We want pics!!
Logged

Offline onemississipp

  • Trad Bowhunter
  • **
  • Posts: 668
Re: first bow.
« Reply #5 on: September 05, 2008, 03:27:00 PM »
Here is my red oak board bow, unbacked....


 http://onemississipp.googlepages.com/board
Logged
Dustin
_ _ _________________________________ _  _

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15006
Re: first bow.
« Reply #6 on: September 05, 2008, 05:41:00 PM »
If this is your first bow, it is more important that you learn the nuances of tillering first then you can go for weight. There is lots of wood out there so you don't have to worry about running out before you get to your next one.      Pat
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: first bow.
« Reply #7 on: September 05, 2008, 07:55:00 PM »
patB  that is kinda what i am focusing on more than anything else right now.  i got a tiller tree made and going to start on the final tillering tomorrow afternoon.   and sorry but there wont be any pics of it till i figure out this dang photobucket thing.   i might to embarrest by it to show it also .
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline dc51

  • Trad Bowhunter
  • **
  • Posts: 14
Re: first bow.
« Reply #8 on: September 05, 2008, 08:01:00 PM »
Use Dustin's link and take your time. I made one 68" 45#@28" unbacked. I needed the practice before I dove into anymore of my Osage. It came out realy good and shoots well.
Have fun.
Don
Logged

Offline beaver#1

  • Trad Bowhunter
  • **
  • Posts: 911
Re: first bow.
« Reply #9 on: September 06, 2008, 09:48:00 AM »
how wide should the limbs be?  right now they are about 3 and 1 half inches.  i know that wides but i want as much strength as i can get. i got it floor tillered yesterday and ready to put in the tiller tree i made last night.
Logged
have i not commanded you? be strong and of good courage;be not afraid or discouraged:for the Lord your God is with you where ever you go. joshua 1:9

Offline George Tsoukalas

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 2922
Re: first bow.
« Reply #10 on: September 18, 2008, 09:48:00 PM »
Red oak is a darn good bow wood. There's board info and a buildalong on my site. jawge
 http://mysite.verizon.net/georgeandjoni/
Logged

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: first bow.
« Reply #11 on: February 03, 2009, 07:28:00 PM »
I hav'nt built a board bow in years.But keep them long and wide for your first bow.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline Roy Steele

  • Trad Bowhunter
  • **
  • Posts: 1087
Re: first bow.
« Reply #12 on: February 03, 2009, 07:29:00 PM »
I hav'nt built a board bow in years.But keep them long and wide for your first bow.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
 20 YEARS LEARNING 20 YEARS DOING  20 YEARS TEACHING
  CROOKETARROW

Offline eman614

  • Trad Bowhunter
  • **
  • Posts: 504
Re: first bow.
« Reply #13 on: February 03, 2009, 10:46:00 PM »
i just made one that is similar to the one you are making. it i s 68" ntn and drew 42# at 28" it is 1" at the handle and fades out to 1.5". it is 1.5" out to the mid limb, and then it fades down to 5/8 of an inch at the nock. it is very smooth with very little stack. not to mention it slings an arrow very well! tis was not my first try , but it is the first one to stay together. make sure to take a look at jawge's web site. my first couple broke because they had run outs, which he explains all about. good luck.
eric
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©