Author Topic: "SuperTiller" software  (Read 2532 times)

Offline Leo L.

  • Trad Bowhunter
  • **
  • Posts: 685
Re: "SuperTiller" software
« Reply #20 on: September 20, 2008, 08:24:00 PM »
What is needed to open the program? It is a .tar document?  What is that?

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: "SuperTiller" software
« Reply #21 on: September 20, 2008, 10:27:00 PM »
Dave send me an e-mail or your address and I'll get the older version to you.
Leo you can download a program to extract it from the tar file    HERE
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline Leo L.

  • Trad Bowhunter
  • **
  • Posts: 685
Re: "SuperTiller" software
« Reply #22 on: September 20, 2008, 11:54:00 PM »
Worked great.  Thanks a lot.  Just need that version of Excel now...

Offline Ray_G

  • Trad Bowhunter
  • **
  • Posts: 928
Re: "SuperTiller" software
« Reply #23 on: September 21, 2008, 12:23:00 AM »
Leo and all,

If you don't have Excel or a current version, you can use the software with Open Office.  It is an open source collection (free) of software that does all that MS Office does plus a few other things (will convert .doc to .pdf as an example).

 http://www.openoffice.org/

I have used Open Office for about two years now.  I downloaded Super Tiller from the link above and it opened right up in Open Office.

I would like to get the instructions or help file for Super Tiller from someone.  Thanks,

Ray
Sunset Hill 64" 54# @ 26"  "Destiny"

B.H.A.

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: "SuperTiller" software
« Reply #24 on: September 21, 2008, 09:59:00 AM »
Ray I hate to tell you but supertiller will NOT work with openoffice.    :(   You can open it but the version of basic that supertiller is written in is different than openoffice uses so the macros that run it do not work.    :banghead:  Supposedly it is possible to rewrite the macros in openoffice basic and it will work but I'm not sharp enough to do it. Also if someone had the developer version of excel it is possible to covert supertiller to an exe program file. Anyone have that?
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline Ray_G

  • Trad Bowhunter
  • **
  • Posts: 928
Re: "SuperTiller" software
« Reply #25 on: September 21, 2008, 12:51:00 PM »
Thanks, B.B.  I launched the program and played with the sheets but did not make any charts or graphs.  I did enter some values but didn't go beyond that.

Thank you for clearing that up.  O.O. is still a nice office suite and it's free.  I will have to look into the macro issue if I get some time this Winter.

Ray
Sunset Hill 64" 54# @ 26"  "Destiny"

B.H.A.

Offline BenBow

  • Trad Bowhunter
  • **
  • Posts: 4690
Re: "SuperTiller" software
« Reply #26 on: September 21, 2008, 03:36:00 PM »
Ray I agree with you on OO being a nice office suite. I use it on all but one of my computers. Just can't justify the cash required for ms office.
But his bow will remain steady, and his hands will be skillful; because of the hands of the Mighty One of Jacob, because of the Shepherd, the Rock of Israel,  (Genesis 49:24 [NETfree])

Offline TNstickn

  • Trad Bowhunter
  • **
  • Posts: 816
Re: "SuperTiller" software
« Reply #27 on: September 21, 2008, 05:28:00 PM »
Sorry guys been outa town.
Pick a spot.>>>>-------> Shoot straight.

Offline Dave521

  • Trad Bowhunter
  • **
  • Posts: 37
Re: "SuperTiller" software
« Reply #28 on: September 21, 2008, 10:58:00 PM »
I have to thank BenBow for pointing out that I should post the files in zip format the new file as well as the older file are now up and ready for download in a zip file format that windows can extract with ease. Sorry about that, been busy doing webdesign and spaced it off. thanks again Ben

Dave

Offline TNstickn

  • Trad Bowhunter
  • **
  • Posts: 816
Re: "SuperTiller" software
« Reply #29 on: September 21, 2008, 11:06:00 PM »
Too cool Dave. Updated me instantly!!!Thanks a million. Greg
Pick a spot.>>>>-------> Shoot straight.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©