The the best of my ability these is the dimensions:
I am pretty confident it is Hickory,
5'6" tip to tip,
1 1/2" wide at mid point which is 33",
Approximately 1/2"-5/8" thick at mid point with the crown on the back,
Very little limb thickness taper from mid section out towards tips, the last 7"-8" the thinnest portion of the limbs,
Limb 5/16"-3/8" thick at bottom nock,
At limb is at least an 1" if not 1 1/8" wide where it meets the nock,
Nock width is 3/8" or possibly 1/2",
The tips above and below the nocks extend about 1" beyond and flare out and back in a partial diamond shape. On this particular bow the bottom tip was more rounded on the end and the top tip more flattend.
I hope this helps give you the basic idea. I don't have access to a scanner to download the rough drawing I made to go with the measurements.
It looks very much like the drawing of a bow found in one of the TTBB's.
Christopher