Author Topic: planning a build  (Read 1039 times)

Offline Lemont

  • Trad Bowhunter
  • **
  • Posts: 49
planning a build
« on: January 21, 2009, 09:26:00 AM »
hi felllas planning a build of a new lam bow 60" r/d any suguestions on the best riser length 16"18"14" so the draw will stay smooth and a starting place on limb thickness please?
Lee

Offline Lemont

  • Trad Bowhunter
  • **
  • Posts: 49
Re: planning a build
« Reply #1 on: January 21, 2009, 09:27:00 AM »
meant to say shooting for 50#@28"
Lee

Offline TimZeigler

  • Trad Bowhunter
  • **
  • Posts: 986
Re: planning a build
« Reply #2 on: January 21, 2009, 10:19:00 AM »
Lee, I think your decision on limb tapers will effect the smoothness of your draw more than the riser length.  IMHO The riser length will determine the forgiveness of the bow, physical weight, pointability, and other shooting aspects. .001 tapers will give you a bit smoother draw over .002 tapers, so when your planning your pack laminations, I'd take that into consideration.  

As far as limb pack thickness, check out binghams website for there thickness chart.  It will help you get a baseline for your first build, IF you use there R/D plans.  Tim
USMC 1992-2000
PBS Associate Member

Offline Lemont

  • Trad Bowhunter
  • **
  • Posts: 49
Re: planning a build
« Reply #3 on: January 21, 2009, 12:24:00 PM »
tim  its not my first but ive only done 2 others the form is of my own design and i know ill miss the mark on weight but the first will give me a starting point also the taper will be 1 1/2" at the fades and 3/8" at the tips by the way are you going to make the rabbit hunt and trad shoot at rockspond this year?
Lee

Offline TimZeigler

  • Trad Bowhunter
  • **
  • Posts: 986
Re: planning a build
« Reply #4 on: January 21, 2009, 09:23:00 PM »
Lee, Not sure if I'll make the Rabbit hunt, it seems to always fall on my one and only guys weekend.  I will definitely be at the traditional shoot.
USMC 1992-2000
PBS Associate Member

Offline Holm-Made

  • Trad Bowhunter
  • **
  • Posts: 1505
Re: planning a build
« Reply #5 on: January 21, 2009, 09:41:00 PM »
Post a picture of the form and we'll be able to give you an idea of where to start.  Without knowing the profile I wouldn't know what to tell you.

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17340
Re: planning a build
« Reply #6 on: January 21, 2009, 10:03:00 PM »
Yep,if you can post a pic of the form,bet you can get some recipes here. My old form took .340 for a60" , 50# @28"  r/d bow, with a 15" riser.
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Lemont

  • Trad Bowhunter
  • **
  • Posts: 49
Re: planning a build
« Reply #7 on: January 21, 2009, 10:45:00 PM »
fellas im still laying out my form i only get 5 or 6 hours a weekk to work most of the time but ill try to post some pics when i get it made so yall can give some suggestions
Lee

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©