« previous next »
Pages: [1]   Go Down

Author Topic: Osprey aluminum bow form  (Read 1111 times)

Offline Holm-Made

  • Trad Bowhunter
  • **
  • Posts: 1505
Osprey aluminum bow form
« on: February 11, 2009, 08:46:00 PM »
I got the call from the machine shop owner today that my form was done.  This guy bought a bow from me so I thought I'd return the favor and give him some business.  After making over 100 Osprey longbows and being very happy with them I decided to take the plunge and have a form built that will last me a lifetime.  I still have to make a top for it but I thought I'd share.  I built a cart for it with casters and I can move it around the shop.  I can also check everything from both sides during glue up.  
I had him machine out a jig/fixture at the same time out of dense plastic to fit the form so I can profile the back of my risers.  
This baby is really nice and just perfect.
 
Logged

Offline Jason Kendall

  • Trad Bowhunter
  • **
  • Posts: 1210
Re: Osprey aluminum bow form
« Reply #1 on: February 11, 2009, 08:56:00 PM »
Thats not fair, I want one too!
Logged

Offline Pluck Yew

  • Trad Bowhunter
  • **
  • Posts: 248
Re: Osprey aluminum bow form
« Reply #2 on: February 11, 2009, 09:01:00 PM »
Chad, That's AWESOME!!!! I built a table out of a door that's an "island" bow form table..I got that idea from you during your MN. bow building weekend...sweet.. can't wait to see it...  :clapper:  

Shawn...
Logged
Give 'em the bird!

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Osprey aluminum bow form
« Reply #3 on: February 11, 2009, 09:16:00 PM »
That is too cool Chad!! Bet you will love it!!
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Holm-Made

  • Trad Bowhunter
  • **
  • Posts: 1505
Re: Osprey aluminum bow form
« Reply #4 on: February 11, 2009, 11:16:00 PM »
Thanks guys.  You wouldn't believe the man hours that went into this form (around 20, give or take).  You don't just plug some numbers into a CNC machine and hit the "on" button.  
The little holes you see at the top of the form have steel coils in them that accept screw threads.  that is where I'll put the adjustable side stops.
The bigger holes in the bottem of the form are just there for aligning the form in the CNC, they do one side then flip it around and do the other side using the holes to line things up.  
I'm excited about it but they don't just give them away you know skilled craftmanship cost $$ as well it should.  Chad
Logged

Offline TNstickn

  • Trad Bowhunter
  • **
  • Posts: 816
Re: Osprey aluminum bow form
« Reply #5 on: February 11, 2009, 11:33:00 PM »
Sweet!!!  :notworthy:
Logged
Pick a spot.>>>>-------> Shoot straight.

Offline Canadabowyer

  • Trad Bowhunter
  • **
  • Posts: 581
Re: Osprey aluminum bow form
« Reply #6 on: February 11, 2009, 11:51:00 PM »
Nice Chad,that should last a while!!!Would you post a pic when you have a bow on it?  Bob
Logged
"non illegitimus carborundum est"

Offline bjansen

  • Trad Bowhunter
  • **
  • Posts: 2263
Re: Osprey aluminum bow form
« Reply #7 on: February 12, 2009, 12:06:00 PM »
Looks great Chad!
Logged

Offline rkmnt2

  • Trad Bowhunter
  • **
  • Posts: 164
Re: Osprey aluminum bow form
« Reply #8 on: February 12, 2009, 12:19:00 PM »
looks prett nice Chad. What's the weight of it?
Logged

Offline Tim Fishell

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3772
Re: Osprey aluminum bow form
« Reply #9 on: February 12, 2009, 12:30:00 PM »
That is some good looking machine work right there!!  I am an engineer in a machine shop and we have a few CNC machines.  Like Chad said there is a bit of work that goes into programming and running a machine.  That is a great form and it should serve you well for lots and lots of years Chad.    :thumbsup:
Logged
Dreams can not be bought; they are free to those who have lived. -Mike Mitten

We must go beyond the textbooks, go out into the untrodden depths of the wilderness & travel & explore & tell the world the glories of our journey

TGMM Family of the Bow

Offline Holm-Made

  • Trad Bowhunter
  • **
  • Posts: 1505
Re: Osprey aluminum bow form
« Reply #10 on: February 12, 2009, 01:54:00 PM »
It weigh 48# the without the top.  I plan to use heat strips and never take it off the cart.  Chad
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©