« previous next »
Pages: [1]   Go Down

Author Topic: New question  (Read 514 times)

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
New question
« on: April 15, 2009, 12:05:00 PM »
I am making a recurve from a ash stave. It is 62" 2" wide at the fades for 7" and the tips are 1/2" and I would like to make pin nocks. Can I make them, if not can I cut through the back of the bow for nocks or do I need over lays?
Logged
Black widow PLX 48@28
Black widow PSRX 48@28

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: New question
« Reply #1 on: April 15, 2009, 01:06:00 PM »
Pin nocks are fine, but never cut through the back of the bow. Overlays help but aren't that necessary.
Logged
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline dave_570

  • Trad Bowhunter
  • **
  • Posts: 46
Re: New question
« Reply #2 on: April 15, 2009, 03:54:00 PM »
well for me i use double nocks..mainly so i don;t
have to be digging the limb tip trying to
string it. Pin nocks are ok, but u don't have too
many options when it comes to stringing.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©