Author Topic: moving to high humidity area  (Read 520 times)

Offline troutremble

  • Trad Bowhunter
  • **
  • Posts: 123
moving to high humidity area
« on: May 18, 2009, 11:39:00 AM »
I have several osage staves i have cured in Colorado but I am moving to Houston,Texas and am worried about picking up too much moisture before I get around to making a bow. I am assuming I will have to store them inside but how do I seal them to pick up as little moisture as possible. Also will I need a hot box there to dry out staves and boards, I have never needed one here. Any advice from bowyers in wet climates would be appreciated.

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: moving to high humidity area
« Reply #1 on: May 18, 2009, 01:07:00 PM »
I recently moved from high humidity to low. I faced the opposite. I would build a hot box and keep it around 90 degs, pick up a thermometer that also reads RH and keep it in the box, you can get one pretty cheap at the hardware store. Then I used to use this calculator.
   http://www.woodbin.com/ref/wood/emc.htm    

I'd seal the back and ends with shellac, or a wood glue.
"If the women don't find you handsome, they should at least find you handy" Red Green

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©