« previous next »
Pages: [1]   Go Down

Author Topic: Sinew Question  (Read 623 times)

Offline tim roberts

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1460
Sinew Question
« on: May 18, 2009, 03:04:00 PM »
How does backing a bow with sinew effect tillering?  
I have a bow I am working on but it looks as though it will come on the light side of where I would like it.  I have it very close to both limbs bending the same and only have about 6 inches to go tillerin it.  Right now it is 30# at 19".  I wouls like a bow that is about 57# at 26".
Thanks,
Logged
Tim

TGMM Family of the Bow

I guess if we run into the bear that is making these tracks, we oughta just get off the trail.......He seems to like it!  
My good friend Rudy Bonser, while hunting elk up Indian Creek.

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Sinew Question
« Reply #1 on: May 18, 2009, 04:29:00 PM »
The limbs should appear stiffer if the sinew is applied evenly. I would tiller to your desired draw length then sinew and adjust from there. Keep in mind you want the sinew to dry real well before bending again, probably a few weeks in dry weather.
Logged
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline John Scifres

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 4540
Re: Sinew Question
« Reply #2 on: May 18, 2009, 05:02:00 PM »
You might make it.  I recommend 3 layers.
Logged
Take a kid hunting!

TGMM Family of the Bow

Offline Clay Hayes

  • Trad Bowhunter
  • **
  • Posts: 275
Re: Sinew Question
« Reply #3 on: May 18, 2009, 10:02:00 PM »
like Dano says, finish it first then sinew it.  You may need to add a little reflex when you put the backing on.  It's easy.

ch
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©