« previous next »
Pages: [1]   Go Down

Author Topic: First timer, Snakeskin over glass help  (Read 562 times)

Offline davesonic444

  • Trad Bowhunter
  • **
  • Posts: 82
First timer, Snakeskin over glass help
« on: June 09, 2009, 10:53:00 AM »
I'm snakeskining an old Palmer. I put the skins on with Titebond111. My next step in ca glue to seal it. I have put 7 coats on and it just keeps soaking in. Should i continue putting the ca glur on untill it leaves a clear topcoat or should i stop and spray my spar urathane. Thanks
Logged

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
Re: First timer, Snakeskin over glass help
« Reply #1 on: June 11, 2009, 08:23:00 PM »
Can't help you there I have never used Super glue on skins just true oil.
Logged
Black widow PLX 48@28
Black widow PSRX 48@28

Offline TVAfishing

  • Trad Bowhunter
  • **
  • Posts: 16
Re: First timer, Snakeskin over glass help
« Reply #2 on: June 13, 2009, 09:10:00 AM »
I would let the CA cure out good and sand it out good to take thr rough spots down. Then spray three to four coats, You could sand between the first two w/ fine paper. Leave it cure out good before sanding.

good luck
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©