Author Topic: Honey Locust & Mulberry  (Read 560 times)

Offline White Oak

  • Trad Bowhunter
  • **
  • Posts: 379
Honey Locust & Mulberry
« on: June 13, 2009, 11:05:00 PM »
Is honey locust of any value as bow wood? If so, how should it be handled after cutting?
I have several good size trees in my pasture that will be coming down. How about mulberry?

                  Thanks,
                         Ed

Offline dobermann

  • Trad Bowhunter
  • **
  • Posts: 28
Re: Honey Locust & Mulberry
« Reply #1 on: June 14, 2009, 12:45:00 AM »
Mulberry is very good, you'll have to use the heart wood, like you would with osage. Mulberry has much thicker sap wood than osage, so you'll need a log of at least 10'' diameter, if you are planing to split it, anything less than 10'' and there just won't be enough heart wood for 2 decent bows.
 Another option, if you find a log thiner than 10'' is not to split it down the middle, so you don't halve the heart wood, but just take a small wedge off of it, this should leave you with a workable size pice of heart wood.
Good luck

Sorry for the double post   :knothead:

Offline dobermann

  • Trad Bowhunter
  • **
  • Posts: 28
Re: Honey Locust & Mulberry
« Reply #2 on: June 14, 2009, 12:46:00 AM »
Mulberry is very good, you'll have to use the heart wood, like you would with osage. Mulberry has much thicker sap wood than osage, so you'll need a log of at least 10'' diameter, if you are planing to split it, anything less than 10'' and there just won't be enough heart wood for 2 decent bows.
 Another option, if you find a log thiner than 10'' is not to split it down the middle, so you don't halve the heart wood, but just take a small wedge off of it, this should leave you with a workable size pice of heart wood.
Good luck.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Honey Locust & Mulberry
« Reply #3 on: June 14, 2009, 10:19:00 AM »
Honey locust will make a good bow. I have not use it yet but have seen very nice honey locust bows. Treat them like whitewood. No matter the wood, the basic drying and curing is the same. The wood has to breath for the moisture to escape so at least split a log in half and seal the ends. If the bark is removed, seal the back.
   Mulberry is an excellent bow wood. For a bow of the same weight as osage add 10% to the length and/or width. Because it is much lighter in physical weight than osage, mulberry can make a faster bow than osage, if designed and executed correctly.
  Mulberry sapwood can be used in a bow. I have made good bows that are all heartwood, with some sapwood left on, 50/50 heart/sap and all sapwood. If the wood is handled and cured correctly it will make a good bow. Although, the more sapwood left in a bow will result in thicker limbs.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline White Oak

  • Trad Bowhunter
  • **
  • Posts: 379
Re: Honey Locust & Mulberry
« Reply #4 on: June 14, 2009, 09:59:00 PM »
Thanks folks. The locusts are are straight and limb free 6' to 8' up. Have alot of mulberry. I'll save some of both.

                     Ed

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©