Author Topic: Cracks in Osage  (Read 773 times)

Offline stickhead

  • Trad Bowhunter
  • **
  • Posts: 152
Cracks in Osage
« on: July 01, 2009, 02:02:00 PM »
Just finished a 67" osage flatbow its very snaky shoots great tiller looks good.but i was shooting it and heard a crack and found it to have developed a crack in the back running with the grain.i was told it would not hurt anything so i shot it some more and it has developed a second one running 1/4"beside the first. one is about 9" one 4" should i wrap the limb with sinew i tried superglue at first but i noticed it got longer since.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Cracks in Osage
« Reply #1 on: July 01, 2009, 03:07:00 PM »
How long did you dry your wood? Sounds like drying checks(cracks). Will you post pics?
  If it is drying checks you can seal the back well to prevent any further checks.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Cracks in Osage
« Reply #2 on: July 01, 2009, 03:48:00 PM »
Sounds like drying checks to me too. I would wrap the bow in Saran Wrap and slow the drying down to prevent further checking, then in a month or two super glue the checks and finish it.
"If the women don't find you handsome, they should at least find you handy" Red Green

Offline stickhead

  • Trad Bowhunter
  • **
  • Posts: 152
Re: Cracks in Osage
« Reply #3 on: July 01, 2009, 04:45:00 PM »
Pat,I'm sure you saw the stave at hickory it was the one the guy selling all the cane shafts had that he didn't want to sell.He said it had been cut over a year I tested it with my moisture meter it read 8.I shot the bow quite a bit in my shop and it has not taken and set but when the cracks came in it was it's first trip outside and it was 95 in the shade.you say seal it I put about 6 coats of tounge oil on it before it left the shop should I seal it with something else

Offline Dano

  • Trad Bowhunter
  • **
  • Posts: 2660
Re: Cracks in Osage
« Reply #4 on: July 01, 2009, 05:50:00 PM »
Tounge oil does not resist moisture, you might try Tru-oil, it's just as easy to apply.

I live in a very dry climate, when ever I bring seasoned wood home from the Midwest, I have to wrap it in saran wrap or it will check badly, the last few % of moisture is criticle. Just my 2 cents, take it for what it's worth.
"If the women don't find you handsome, they should at least find you handy" Red Green

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Cracks in Osage
« Reply #5 on: July 01, 2009, 10:58:00 PM »
The back especially needs to have a good vapor barrier. When I get a stave without bark I seal it with shellac no matter how long it has been cut. The changes from where it was cut to my house are enough in some cases to cause checks.I also like to let wood acclimatize to my shop for a while before I mess with it.
   Tru-Oil will seal the wood better than tongue oil. IMO      It is easy to apply and easy to repair when needed.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline stickhead

  • Trad Bowhunter
  • **
  • Posts: 152
Re: Cracks in Osage
« Reply #6 on: July 02, 2009, 08:17:00 AM »
Thanks for the info

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15027
Re: Cracks in Osage
« Reply #7 on: July 03, 2009, 12:18:00 AM »
On the lower level of venders at Hickory?  That was David Knight.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Hermann From Bavaria

  • Trad Bowhunter
  • **
  • Posts: 194
Re: Cracks in Osage
« Reply #8 on: July 15, 2009, 01:54:00 AM »
i got the same problems with my osage flat. in my case the drying was the problem. i waitet till the cracks stopped moving, then i used superglue to fix it. now i shoot the bow about one year since the repair without any new crack.

greetings from bavaria
in past even the future was better, so what do you want?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©