Author Topic: bamboo flooring?  (Read 1187 times)

Offline bubby

  • Trad Bowhunter
  • **
  • Posts: 258
Re: bamboo flooring?
« Reply #20 on: November 10, 2009, 02:06:00 PM »
so sam, when you said you used it foe boo backed board bows you were backing the vert bamboo flooring with a bamboo backing strip?

Offline rdnymllr

  • Trad Bowhunter
  • **
  • Posts: 3
Re: bamboo flooring?
« Reply #21 on: November 11, 2009, 10:44:00 AM »
does anyone have pics to show the difference in verticly and horizontily stacked bamboo?

Online Sam Harper

  • Trad Bowhunter
  • **
  • Posts: 473
Re: bamboo flooring?
« Reply #22 on: November 11, 2009, 01:46:00 PM »
bubby, yes, that's right.

rdnymllr, go to ifloors.com, and you can see pictures of horizontal and vertical grain bamboo flooring.
There are strange things done in the midnight sun by the men who moil for gold.

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: bamboo flooring?
« Reply #23 on: September 23, 2010, 05:59:00 PM »
try horizontal for a backing...delam it first then use a slice...if you get whole fibers they shouldnt lift...
ain't got no gas in it...mmmhmmm...

Offline JamesV

  • Trad Bowhunter
  • **
  • Posts: 2027
Re: bamboo flooring?
« Reply #24 on: September 25, 2010, 01:38:00 PM »
I backed a R/D hickory longbow with action boo and the bamboo broke at full draw. The hickory held but it stressed so bad it couldn't be saved.
Proud supporter of Catch a Dream Foundation
-----------------------------------
When you are having a bad day always remember: Everyone suffers at their own level.

Offline AZ_Shooter

  • Trad Bowhunter
  • **
  • Posts: 146
Re: bamboo flooring?
« Reply #25 on: September 29, 2010, 12:49:00 PM »

Offline Jeremy

  • Trad Bowhunter
  • **
  • Posts: 3242
Re: bamboo flooring?
« Reply #26 on: September 29, 2010, 12:55:00 PM »
A board bow... probably not unless it's really long and low poundage.

A backed bow - definitely.  You need something on the back that's tension safe: hickory or raw boo work.

The only issue I have with using this stuff in non-glass bows is that it's weaker in compression than red oak and you have to treat it as such.  make it wider, trap the back and expect to still lose more of the reflex you glue in.  I've yet to see it crysal though, even when tortured.
>>>-TGMM Family Of The Bow-->
CT CE/FS Chief Instructor
"Death is not the greatest loss in life.  The greatest loss is what dies inside us while we live." - Norman Cousins

Offline AZ_Shooter

  • Trad Bowhunter
  • **
  • Posts: 146
Re: bamboo flooring?
« Reply #27 on: September 29, 2010, 12:59:00 PM »
Thanks Jeremy.

Offline AZ_Shooter

  • Trad Bowhunter
  • **
  • Posts: 146
Re: bamboo flooring?
« Reply #28 on: September 29, 2010, 01:07:00 PM »
Peter,

Would please provide us with the particulars (dimensions, design, etc.) of the board bow that you built from vertical stacked bamboo flooring?

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: bamboo flooring?
« Reply #29 on: September 29, 2010, 01:28:00 PM »
im pretty sure if it was split well enough and you had a thin enough layer it would work , it might be way too much work to get it functional , but its definitely possible...
ain't got no gas in it...mmmhmmm...

Offline rbbhunt

  • Trad Bowhunter
  • **
  • Posts: 478
Re: bamboo flooring?
« Reply #30 on: September 30, 2010, 03:00:00 PM »
RBBHUNT
"Those who will trade liberty for
security, deserve niether" B. Franklin (a long time ago and still valid)

Offline Johan van Niekerk

  • Trad Bowhunter
  • **
  • Posts: 207
Re: bamboo flooring?
« Reply #31 on: September 30, 2010, 03:28:00 PM »
OK now you guys scared me. I've been using horizontal grain to make core lams and have had no problems yet. I also have a friend using the same and his bows are all doing fine too. Who personally had the horizontal grain boo delaminate on them? Or is this mostly "hearsay"?

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©