Author Topic: rubber band bow forms  (Read 544 times)

Offline 3point or better

  • Trad Bowhunter
  • **
  • Posts: 42
rubber band bow forms
« on: December 05, 2009, 11:31:00 PM »
How many of you use this type of form?
lets see some pictures of your forms also .
howatt hunter 60#
2216 easton xx75
zwicky 125 gn.
Live to hunt . hunt to live.

Offline Russell S.

  • Trad Bowhunter
  • **
  • Posts: 230
Re: rubber band bow forms
« Reply #1 on: December 05, 2009, 11:57:00 PM »
i use em.  here is a picture of mine with a bow cooling down outside. i have already taken about 1/2 the bands off when this picture was taken.

 
does everyone else look up when someone yells "DUCK!!"?

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15019
Re: rubber band bow forms
« Reply #2 on: December 06, 2009, 11:44:00 AM »
I don't think you can have too many but you can definitely have too few.
  Do a dry run to see how many bands at what location on the glue up before you add the glue. I know the fade areas will need more band pressure as will recurve areas with sharp bends. smooth even curves shouldn't need as much.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17335
Re: rubber band bow forms
« Reply #3 on: December 06, 2009, 01:08:00 PM »
Be sure to use a pressure strip, and Marty and Russell use a narrow strip on top of that I think.  The air hose type form puts pressure in the center of lam,band form more at the edge.
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Russell S.

  • Trad Bowhunter
  • **
  • Posts: 230
Re: rubber band bow forms
« Reply #4 on: December 06, 2009, 02:04:00 PM »
i will take a picture of the thin stip i use for balanced force.  I use a ~3/4" strip of rubber on the side opposite the bow, so the bands push in the center as well as the sides.  that way the limb profile doesnt "dish"  i think marty uses some PVC trim.  rubber is real easy for me because i have left overs when i make the bottom of the pressure strip and it does not need to be relieved to make the curves like the pvc does.
does everyone else look up when someone yells "DUCK!!"?

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©