« previous next »
Pages: [1]   Go Down

Author Topic: Help with making a spindle sander  (Read 346 times)

Offline Scott F

  • Trad Bowhunter
  • **
  • Posts: 217
Help with making a spindle sander
« on: January 03, 2010, 05:51:00 PM »
Here is a motor unit that I saved when my kids' 'bounce house' ripped for the last time.

I intend on mounting it on the underside of a 3/4" piece of plywood to use as a spindle sander, but I don't know the best way to mount the spindle!  Any suggestions?

 

Thanks,
Scott
Logged

Offline Scott F

  • Trad Bowhunter
  • **
  • Posts: 217
Re: Help with making a spindle sander
« Reply #1 on: January 03, 2010, 09:30:00 PM »
Disregard...
Logged

Offline AALLFAB

  • Trad Bowhunter
  • **
  • Posts: 287
Re: Help with making a spindle sander
« Reply #2 on: January 08, 2010, 09:22:00 PM »
a set of spindles cost about $450 and have a special taper to center and seat. You would need a machine shop buddy. If your spindle is not exact centered you will be pretty unhappy with the machine. Jim
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©