Author Topic: Max riser accent lam thickness (Read 499 times)

Teagus · « **on:** January 24, 2010, 10:50:00 AM »

At what thickness should you stop thinking of a lam strip and start thinking of cutting and shaping (bandsaw and spindle sander) when designing a multilayer riser? I guesss this would be based on the assumption one has resaw and thickness sanding capability to hit any desired thickness. I imagine you guys have your own rule like example: 125 thk. Is wood species a big factor in the max thickness?

Mike W

Apex Predator · « **Reply #1 on:** January 24, 2010, 01:05:00 PM »

The shape of the contour will have a big effect. Normally .060-.070 is as thick as I want to bend.

kennym · « **Reply #2 on:** January 24, 2010, 05:45:00 PM »

Like Marty,if its a tighter radius,.060 is plenty. On these bows,I went .125 cause it was a gentle bend...

Teagus · « **Reply #3 on:** January 24, 2010, 05:57:00 PM »

Yea I sort of forgot the radius factor. Kenny, that look was what I had in mind. Are those inside riser cuts freestyle or done on a radius jig like on po boy site?

Mike W

kennym · « **Reply #4 on:** January 24, 2010, 06:14:00 PM »

Those are freestyle,I made a jig,but it is not that hard to do without one. Hate the setup time it takes on my jig!

Teagus · « **Reply #5 on:** January 24, 2010, 06:32:00 PM »

Lordy, the pressure is tremendous. This site is evil. Got to get started with everything I learned here in only one month. Build a long is coming.

Mike the OCD bowyer

News:

Author Topic: Max riser accent lam thickness (Read 499 times)

Teagus

Max riser accent lam thickness

Apex Predator

Re: Max riser accent lam thickness

kennym

Re: Max riser accent lam thickness

Teagus

Re: Max riser accent lam thickness

kennym

Re: Max riser accent lam thickness

Teagus

Re: Max riser accent lam thickness

Users currently browsing this topic: