« previous next »
Pages: [1]   Go Down

Author Topic: Sanding and finishing fiberglass  (Read 555 times)

Offline barley40

  • Trad Bowhunter
  • **
  • Posts: 95
Sanding and finishing fiberglass
« on: January 30, 2010, 10:31:00 PM »
How heavy the sandpaper on the first sanding? I'm guessing 400 grit on the finish up. Maybe tung oil finish then? huh?
Logged

Offline Robertfishes

  • Trad Bowhunter
  • **
  • Posts: 3490
Re: Sanding and finishing fiberglass
« Reply #1 on: January 31, 2010, 10:47:00 AM »
I use 220, then 320 and have finished some with 400. I know some guys who only use the 220 and have nice looking bows. I have only used Minwax Spar Urethane in the spray can for finish. If you use the search function you will find a lot of great information
Logged

Offline Swissbow

  • Trad Bowhunter
  • **
  • Posts: 868
Re: Sanding and finishing fiberglass
« Reply #2 on: January 31, 2010, 03:17:00 PM »
I use 220 and 360 grid and after that I use Scotch brite pads. That stuff is just perfect.

----------
Andy
Logged

Online jess stuart

  • Trad Bowhunter
  • **
  • Posts: 1722
Re: Sanding and finishing fiberglass
« Reply #3 on: January 31, 2010, 05:29:00 PM »
About 320 is as fine as I go also.  Always has came out fine.
Logged

Offline Bob Sarrels

  • Trad Bowhunter
  • **
  • Posts: 307
Re: Sanding and finishing fiberglass
« Reply #4 on: February 08, 2010, 10:20:00 PM »
I go to 150 and stop.  Finish stick better.
Logged
Now then, get your weapons ~ your quiver and bow ~ and go out to the open country to hunt some wild game for me.  Gen. 27.3

Online kennym

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 17339
Re: Sanding and finishing fiberglass
« Reply #5 on: February 08, 2010, 10:26:00 PM »
On my own bows,150 is it,I like a flat finish anyway for huntin.

On bows for friends,220
Logged
Stay sharp, Kenny.

   https://www.kennysarchery.com/

Offline Holm-Made

  • Trad Bowhunter
  • **
  • Posts: 1505
Re: Sanding and finishing fiberglass
« Reply #6 on: February 08, 2010, 11:26:00 PM »
If I'm already at the poundage I want I'll knock the sheen off with 220 and quit.  If I want to lose a pound or two I hit it hard with 150 then 220.  Finish sticks better the courser you leave it and you'll never see the fine sanding marks unless you go with a thin coverage of high gloss finish.  Chad
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©