Author Topic: riser length (Read 499 times)

Traditionalfirst · « **on:** April 12, 2010, 05:59:00 PM »

Ok fellers I am going to try my first R/D bow. My for is for a 60" and 62" that is ntn. What is a good riser length for this length and style of bow?

Apex Predator · « **Reply #1 on:** April 12, 2010, 06:16:00 PM »

17" works well for me.

strungstick · « **Reply #2 on:** April 12, 2010, 06:59:00 PM »

16" for me.

Traditionalfirst · « **Reply #3 on:** April 12, 2010, 07:05:00 PM »

Hey strungstick, this is your form profile you sent me a while back. Didn't know it was you till I checked the profile.

strungstick · « **Reply #4 on:** April 12, 2010, 11:18:00 PM »

Let me know how it turns out.

Traditionalfirst · « **Reply #5 on:** April 12, 2010, 11:51:00 PM »

I sure will.

greyhawk39 · « **Reply #6 on:** April 14, 2010, 09:47:00 PM »

I use this formula of sorts... 3 times the bow length... so a 60"\\3= 20" riser.

Sharp Shooter · « **Reply #7 on:** April 14, 2010, 10:34:00 PM »

I just finished a 62" takedown and my riser is 15". The bow shots great and zero stack at 30" draw. Tony

greyhawk39 · « **Reply #8 on:** April 14, 2010, 10:49:00 PM »

Show us some pictures of it,it sounds like it would be a fast bow, with that kind of travel on the limbs.

marty z · « **Reply #9 on:** April 15, 2010, 12:08:00 AM »

20" for me

Sharp Shooter · « **Reply #10 on:** April 15, 2010, 10:17:00 AM »

Jeff I don't know how to post pics on this site. I'll send them to your email if you can post them for me. Tony

News: