splicing veneers

[JamesV]

I have seen some beautiful bows with veneers spliced on the limbs posted here. How do you keep them from moving during glue-up? Are they glued together beforehand?

[Jason Scott]

I haven't done that yet but this is how I would do it.
 http://poorfolkbows.com/glass3.htm

[JamesV]

Thanks Jason, Very good information, not ready to try that yet but I will save it.

                    James

[Jason Scott]

Are you talking about the splice in the middle of the riser, which is the center of the bow or are you talking decorative splices in the mid limb area?

[yamapup]

If you go to the Georgia Outdoor news forum and traditional, look for Marty Thompsons post titled (Sapelo and  a Rutting Buck). He does a bow build-a-long and shows how he does a splice. Pup

[gudspelr]

I've only dealt with splices at the center of the riser and I'd suggest putting a touch of glue on them prior to gluing up the bow.  I didn't and found I had trouble keeping them from slipping and sliding around while gluing the rest of the bow up.  Just my $.02.

Jeremy

[Swissbow]

Here   http://tradgang.com/noncgi/ultimatebb.php?ubb=get_topic;f=125;t=003239;p=2   ( at the bottom of the page ) you can see how Marty ( Apex ) does them. I believe somewhere there is another build along from him where he shows it step by step with even more pictures, but I couldn't find it. I did it exactly this way except for one where I was to impatient and didn't glue em together and I had a big hassle to keep the lams in place during the glue up.

----------
Andy

[Apex Predator]

I get the impression he is asking about decorative veneers under glass.  See Sam Harper's build-a-long.