twisted solid fiberglass limb......

[jabhunt2010]

hi guys wanted to know if anyone had a method for fixing a twisted limb from a bear 76er, solid fiberglass 50#. recently acquired one and its in pretty good shape all but for the top limb, any help is appreciated thanks alot    Jamie  ( have read the posts on here about twisted limbs, but didnt know howe much diff solid glass would be)

[MR BILL SHORTY]

I DID A SET. WARMED ONE UP AT A TIME OVER THE ELECTRIC STOVE [DON'T MELT IT] SNAPPED IT BACK IN THE RISER AND TWIST. COOLED IT UNDER COLD WATER. MIGHT TAKE A COUPLE OF TRIES BUT CAN GET RIGHT WHERE YOU WANT  BILL

[Eric Krewson]

I straightened a 76er limb a few weeks ago. It was so bad the string was several inches off the handle.

After several attempts with mild heat without success I decided I would straighten the limb or melt it.

I heated up really hot with my heat gun and twisted it straight with a crescent wrench.

The ugly thing was actually a pretty good shooter after I fixed it.