« previous next »
Pages: [1]   Go Down

Author Topic: Cracks in the back  (Read 292 times)

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
Cracks in the back
« on: November 09, 2010, 10:03:00 AM »
I have been shooting this Osage bow in and was going to put some skins on it, when I found these in the back I put super glue in them. Will it be OK?
 
Logged
Black widow PLX 48@28
Black widow PSRX 48@28

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: Cracks in the back
« Reply #1 on: November 09, 2010, 10:36:00 AM »
they look bad, but I think you will be fine. You could wrap them and give the bow some color to highlight the skins to be safe. I have a few bows with the same thing and have put thousands of shots through it with out ever doing a thing to it.
Logged
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline vanillabear?

  • Trad Bowhunter
  • **
  • Posts: 748
Re: Cracks in the back
« Reply #2 on: November 09, 2010, 10:56:00 AM »
Logged

Offline Don Armstrong

  • Trad Bowhunter
  • **
  • Posts: 548
Re: Cracks in the back
« Reply #3 on: November 09, 2010, 11:09:00 AM »
I just did 2 recurves and they have MUCH worse splits than those. I filled with super glue and said a prayer. They are holding up great so far. The next time I recurve or bend osage, I'm going to use steam and not my heat gun  :(  . Don
Logged

Offline Joey V.

  • Trad Bowhunter
  • **
  • Posts: 73
Re: Cracks in the back
« Reply #4 on: November 09, 2010, 11:13:00 AM »
Flow in super glue and back it with epoxy and silk. When cover with skin.  It will work for longer than you will  :)
Logged

Offline ranger 3

  • Trad Bowhunter
  • **
  • Posts: 2147
Re: Cracks in the back
« Reply #5 on: November 09, 2010, 06:28:00 PM »
Thanks, that is what i was thinking
Logged
Black widow PLX 48@28
Black widow PSRX 48@28

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Cracks in the back
« Reply #6 on: November 09, 2010, 10:48:00 PM »
Should be good as long as they don't run off the edge of the limb.

 Stiks
Logged
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve

Offline Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15009
Re: Cracks in the back
« Reply #7 on: November 09, 2010, 10:56:00 PM »
From the discoloration it looks like you overheated that area and dried it out, causing the checks. Should be fine with the super glue. I think I'd shoot it a bunch first before putting on the skins...just in case!
Logged
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline Stiks-n-Strings

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 3226
Re: Cracks in the back
« Reply #8 on: November 10, 2010, 10:06:00 AM »
Boy Pat you got a good eye. I didn't notice the color until you pointed it out.

 Stiks
Logged
Striker stinger 58" 55# @ 28
any wood bow I pick off the rack.
 2 Cor. 10:4
 TGMM Family of The Bow
 MK, LLC Shareholder
Proud Member of the Twister Twelve
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©