Author Topic: Reflex/Deflex tillering in GA...or close  (Read 361 times)

Offline Monkey Wrench

  • Trad Bowhunter
  • **
  • Posts: 73
Reflex/Deflex tillering in GA...or close
« on: January 24, 2011, 01:17:00 PM »
Hey guys,

I'm making a reflex/deflex bamboo backed ipe bow for the trade (actually building 2 of them *just in case*).

I've completed a few straight profile longbows, but this will be my first experience with a r/d design.  Is there anyone that is somewhat close to Atlanta that has experience with this?  I would be willing to drive up to 3-4 hours, which puts my range from Nashville to southern side of Georgia, and the edge of Alabama to Savannah.  I'm not looking for you to do the work, just lend advice and we'll tiller as a team.  Will also bring a good dinner, drinks, whatever.  The bows will be floor tillered and ready to hit the short string when I show up.

Thanks!!!
Brad

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4249
Re: Reflex/Deflex tillering in GA...or close
« Reply #1 on: January 25, 2011, 08:30:00 AM »
Any Hits Brad!

Offline PEARL DRUMS

  • Trad Bowhunter
  • **
  • Posts: 3457
Re: Reflex/Deflex tillering in GA...or close
« Reply #2 on: January 25, 2011, 09:02:00 AM »
Brad I say " go for it!" If you have built straight profiles you can build r/d's all the same. Take your time and look at pic's of properly tillered r/d bows. Roy from PA posts some perfect BBO R/D bows. Its just wood after all, buy more if it breaks! I use pic's from this page all the time to help me through tough builds.

Offline Monkey Wrench

  • Trad Bowhunter
  • **
  • Posts: 73
Re: Reflex/Deflex tillering in GA...or close
« Reply #3 on: January 25, 2011, 09:24:00 AM »
No hits yet, looks like I need to up the ante.  :)

Y'all realize I'm an awarded, pulled pork barbeque champion...right?  You teach me to tiller, I'll teach you to smoke.

Online Pat B

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 15008
Re: Reflex/Deflex tillering in GA...or close
« Reply #4 on: January 25, 2011, 09:54:00 AM »
I don't build R/D bows because I find them hard to tiller or I'd be willing to help you. Start working on it and post pics of your progress. I'm sure others will chime in to help you along.
Make the most of all that comes and the least of all that goes!
TGMM Family of the Bow

Offline hova

  • Trad Bowhunter
  • **
  • Posts: 1307
Re: Reflex/Deflex tillering in GA...or close
« Reply #5 on: January 25, 2011, 10:54:00 AM »
tillering is just finishing up removing the bow from the wood it came packaged in. like plastic wrap , only not...


now wheres that recipe?
ain't got no gas in it...mmmhmmm...

Online Roy from Pa

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 20644
Re: Reflex/Deflex tillering in GA...or close
« Reply #6 on: January 25, 2011, 01:25:00 PM »
Make yourself a tillering gizmo, go with a short string in the bows string grooves and go slow.

Offline Monkey Wrench

  • Trad Bowhunter
  • **
  • Posts: 73
Re: Reflex/Deflex tillering in GA...or close
« Reply #7 on: January 25, 2011, 03:33:00 PM »
It's my understanding a tillering gizmo will not work with a r/d profile.  

No biggie guys, I'll do my best.  I figured there would be someone around here that wouldn't mind a 2 hour team-build.  Always good to meet new folks where possible.

Offline DVSHUNTER

  • Trad Bowhunter
  • **
  • Posts: 2717
Re: Reflex/Deflex tillering in GA...or close
« Reply #8 on: January 26, 2011, 12:38:00 AM »
bring them to st. louis. I'll give you a hand. We can make a weekend of it. I've been planning on a bow building weekend for awhile anyway.
"There is a natural mystic flowing through the air; if you listen carefully now you will hear." Bob Marley

Offline KellyG

  • Trad Bowhunter
  • **
  • Posts: 4249
Re: Reflex/Deflex tillering in GA...or close
« Reply #9 on: January 26, 2011, 05:35:00 AM »
heck for good bbq I wish I knew more for I would come down your why for sure.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©